Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 24, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2004 Chrysler Crossfire 3.2L Limp In Mode VIN: 1C3AN69L34
Alldata leaves you in the dark on this one...I think it may be the tcm or shifter (i know its common on slk`s)...??? Thanks guys in advance...
View
1999 Dodge Ram 1500 Truck 5.2L Stall VIN: 3B7HC13YBX
This stalls hot, or cold, when letting off the throttle quickly. Espessially with a/c on.
View
2001 Dodge Durango 4.7L Rear Window Defogger Botton VIN: 1B4HS28N31
greeting's fellow tech's.. -this vehicle has the rear def. Botton light flashing & a/c botton does not light up?? -vehicle originally got towed in as a no start condition with several code's p1596-p0445-p1594-p0113-p0118-p1492-p0123-p0463. -after diagnosing th...
View
2001 Dodge Ram 1500 Truck 5.9L No Start VIN: 3B7HF13ZX1
Truck towed in no start,Checked for spark none at any plugs or at coil. Had code for Cam and Crank out of sink no other codes. Scan computer and all checks fine also can fire coil with scanner. When truck is cranked noid at injector blinks.Has new Crank sensor...
View
2004 Dodge Ram 2500 Truck SLT 5.9L soft pedal VIN: 3D7KU28C64
Truck came for a complaint that the brake pedal goes soft, KOEO off you can stand on the pedal and its hard as a normal pedal would be with out any booster, Imediatly start truck up and the pedal goes soft, So we replaced the brake booster, and brakes were fir...
View
2004 Dodge Ram 1500 Truck SLT 4.7L Will not go in park VIN: 1D7HA18N44
Thanks in advance fellow technicians! Customer stopped vehicle to get gas, when he went to shift into park, it would only go into reverse "R" as far as the computer registered. (Vehicle was actully in park though) Vehicle would not start. Replaced computer wit...
View
2005 Dodge Ram 2500 Truck Laramie 5.9L engine VIN: 3D7KS28C65
Diesel guys please help! Customer had truck towed in after he ran it completely out of fuel and cranked until he melted the passenger side battery positive terminal. I replaced both batteries and the bad terminal, replaced the fuel filter and added about 4 gal...
View
2006 Dodge Magnum R/T 5.7L lifters VIN: 2D4GV57276
Good afternoon Dodge techs! I have a 06 dodge Magnum RT 5.7 hemi in the shop. Came in with a p1411, definite miss on cyl 1, no valve tick noise. Performed diagnistics and tested the RDS solenoids activations with the scanner and all clicked. So all my electri...
View
2002 Jeep Grand Cherokee Limited 4.0L No Start, MIL Lamp on VIN: 1J8GW58S12
Jeep towed to our shop,cranks no start,fuel pressure o.k.no injector pluse,no communication with scan tool on engine or trans all others will communicate,checked fuses all o.k.checked power@ 2 and 22 black,both o.k checked grounds@31and 32 with powered test li...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2003 Chrysler 300M 3.5L Hesitation, Stall, MIL Lamp on VIN: 2C3AE66G32
thanks to all ,the fix was flywheel tone ring was cracked,had to pull trans to see it,we tried to use a camra but all looked good.thanks again mike Trouble codes: P0016.
11
2000 Dodge Intrepid 2.7L Cuts out, MIL Lamp on VIN: 2B3HD46RXY
Thanks to all that replied! The majority of the replies said that timing chain had jumped or the crank sensor was bad. Well, the cam sensor was bad. We just couldn't get the newly designed sensor to work. We got one from the salavge yard and made sure it was t... Trouble codes: P0340 (no cam sensor).
15
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next