× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 18, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1988 Ford Mustang GT 5.0L no start hot VIN: 1FABP42EXJ
came in for no start hot, replace alternator, was not charging enough, also replace battery, one month later replace alternator again. still the same. now charge at 12.79 volts. rev up engine and goes to 13.36v, checked wiring to alternator, seems o/k
View
2002 Ford F-450 Super Duty XL 6.8L Clutch VIN: 1FDXF46S42
i installed a new clutch from ford in this vehicle, less than 2 weeks later it came back with the center of the clutch broke out. The splines were in good shape but the clutch was broken. Installed new clutch kit again from ford, 2 months ago. It is back with ...
View
2002 Ford Focus SE 2.0L valve lifter VIN: 1FAFP33P62
Still looses compression on #3 the longer it runs its like the lifter pumps up and does not release
View
2003 Ford Focus LX 2.3L MIL Lamp on, long crank VIN: 1FAFP33Z23
I believe what I might have is a correlation problem , but cant find a known good cam/crank pattern anywhere. I have a scope pic of what my readings are. I set tdc and checked that the crank sensor is 9 teeth away from the missing tooth . Need some help please Trouble codes: P0340
View
2004 Ford Excursion Limited 6.0L Hesitation VIN: 1FMSU45P54
Good Morning, Have a 6.0 with a cold engine no power issue. When engine oil temp gets to 110' full power till over night soak. Turbo works fine. FICM has proper voltage(supply and out put), icp @ 37.5% full throttle and pressure 1329 in gear @ 1350 rpm full th...
View
2004 Ford F-250 Super Duty XLT 6.0L Surge, no power VIN: 1FTNW20P84
Here's what we got. Truck belongs to a fellow who does custom hauling. Truck has always ran good with plenty of power. Down in CA it started to have no power with or without a load. Shop replaced turbo-they installed a high performance turbo. Truck ran good fo... Trouble codes: P0401, P2263
View
2005 Ford F-250 Super Duty FX4 6.0L No Start VIN: 1FTSW21P25
Worked on the 7.3L DIT for five years and left Ford when the 6.0L came out, since then I only referred 6.0L's to the dealerships for warranty head gaskets. Now I have a 6.0L out of warranty with very low ICP and will not start. Just replaced the IPR with a For...
View
2002 Mercury Villager Sport 3.3L Poor Idle Quality, Hesitation, Misfire, MIL Lamp on VIN: 4M2ZV12T82
Removed pug tranferd to number 3 cylinder three.Ran engine pulled #2 spark,pulled inj harness both gave no change in rpm.Spark showed 20 KV Trouble codes: P0302 (Cylinder number 2 miss fire)
View

Fixes & Summaries for Ford
Fix/Summary Answers
2000 Ford F-150 XLT 5.4L Cluster VIN: 1FTRX18LXY
Well this one is fixed, I went through all of the wiring etc, had power to the EEC relay but not fuses 18 & 23. If I power up that circuit, the vehicle will start and cluster comes back to life, I disassembled the under-hood fuse box and where the wiring from ...
10
2003 Ford Ranger XL 3.0L Fogging VIN: 1FTYR14V83
THANK YOU AGAIN FOR ALL THAT RESPONDED. BUT HAS IT HAPPENS SO MANY TIMES IN THIS BUIS. THE CUSTOMER NEEDED THE TRUCK BACK AND WE DID NOT HAVE MUCH MORE TIME TO FINISH WITH THE DIAG. I CAN OFFER THIS. WE DRILLED A FEW 1/2" DIAMETER HOLES ON THE FAN SIDE OF THE ...
24
2006 Ford Taurus SEL 3.0L Poor Idle Quality, MIL Lamp on VIN: JFAFP56U16
i want to thank everyone who has answered it was the catalytic converter.it blew a 2 on back pressure. and the front a half. so thanks agian to everyone Trouble codes: P0171.
11
2004 Lincoln LS 3.0L Hesitation, MIL Lamp on VIN: 1LNHM86S44
I really screwed up the update and I’m not aloud another. So in order to add more info, I need to close with summary. This car is not fixed And I DO need more help. After the car is fixed I will then post the fix. We are now getting a P0135 Oxygen sensor Bank... Trouble codes: P2135 (TP sensor a/b voltage correlation), P2106 (TAC Forced Limited Power).
21
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next