|Prev||Professional Automotive Repair Technical Discussions for June 30, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Jeep Grand Cherokee Limited 4.7L compressor VIN: 1J4GW58N6X
Hey guys got a weird one here.the compressor would not run.checked voltages at relay good powers,but no ground to pull in the relay.the ground comes from the pcm,so i commanded on with my modis and it would cycle.i voltage dropped all powers and grounds and th...
|2002 Jeep Liberty Sport 3.7L axle? VIN: 1J4GL48K62
Jeep has a vibration that seems to be coming from the RF on decel mostly noticable around 20-25 mph when it shakes the whole vehicle. I replaced the hub assy. due to noise. Noise is gone but vibration is still there. I am thinking axle but was wondering if any...
Fixes & Summaries for Chrysler
|2006 Chrysler PT Cruiser 2.4L Engine VIN: 3A4FY48B16
I took some of the advice and killed each cylinder with the scanner. I noticed a very slight difference on cylinder 2. On a whim, I decided to pull the cylinder 2 plug wire. The noise stopped completely. After pulling piston 2 for inspection, we found that the...
|1999 Dodge Ram 1500 Truck 5.2L engine VIN: 1B7HC13Y1X
just want to say thanks for all the great advise. it was the lower gasket that was causing the whistle. the intake set i ordered the first time included the lower gasket but the tech did not install it the first time when the intake gaskets were replaced. oh w...