Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 17, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for European
Help Request Answers
2002 Audi Allroad Quattro 2.7L windows, dome light, pwr seat VIN: WA1YD64B29
The dome lights will pulse on and off, and intermittantly fuse 14 will blow. I replaced the right rear door latch because it was intermittant, and a code was set in the central lock module "cannot lock right rear door". Since I replaced the latch the code does...
View
1995 BMW 740iL 4.0L No Start VIN: WBAGJ6324S
Car came in with no start. Found water in DME. replaced with reman unit. Car cranks, no start. Has code 66. I believe I need to align DME with EWS. Can I do this with a Launch or a Modis? If so, how? Trouble codes: 66
View
1997 BMW 528i 2.8L MIL Lamp on VIN: WBADD6329V
Replaced said components and still getting codes for the Pre-Cat Oxygen Sensors. In my haste I cleared the codes before saving any Freeze-Frame Data. Cleared Adaptations (which was not performed before when the Oxygen Sensors were replaced, but I'm almost sure... Trouble codes: 230 (E6 Oxygen Sensor Bank 2 Before Catalytic Converter Control Frequency), 229 (E5 Oxygen Sensor Bank 1 Before Catalytic Converter Control Frequency)
View
2005 Jaguar XK8 4.2L power antenna VIN: SAJDA42C55
hello everyone. today im trying to fix this 05 xk8 jag's power antenna. Car came with broke mast. Replace every thing is good with car not running but when start the mast stops dead in its tracks. Ok im using a power probe3 to monitor the center wire at the mo...
View
2004 Volkswagen Jetta TDI 1.9L lack of power VIN: 3VWRR69M64
Vehicle idle's great... but has no power, i marked cam and crank positions before removal and was very careful on install, i did not have the vw tools. Will this vehicle idle good if the timimng belt is one tooth off ?? No codes!! Thankyou,
View
2003 Volvo V70 2.4L Timing Belt Issue VIN: YV1SW58D02
Vehicle came in for timing belt as preventative maintenance. We marked very well before removal. Following Mitchell and our timing lines vehicle started up perfect. After about 40 miles of driving, shut off vehicle and when you restart check engine light popes...
View

Fixes & Summaries for European
Fix/Summary Answers
2004 Audi S4 4.2L Electronic VIN: WAUPL68E04
Iam not acxactly sure its fixed but I removed the main controler took it apart blew it all out and reinstalled an all has worked well since Thanks all Gary
3
2004 Land Rover Freelander SE3 2.5L Lighting VIN: SALME11404
Hello everbody. Yes the problem was the lighting control module. I took it out & it was burn internaly.Thanks for everybody.
2
2003 Mercedes-Benz C240 4Matic 2.6L engine mount VIN: WDBRH81J63
Well Iam closing this out with no solid resolve. All replies had some good input, I tryed exhaust alignment on drive on rack, all the parts installed were OE, the axels were installed all the way, I ran ring gear(this needs to be done when mounts are replaced)...
7
2003 Mercedes-Benz SL55 AMG Kompressor 5.5L Cuts out VIN: 2304751F03
So far, I haven't got the customer to return to try some of the suggestions which included scoping the fuel pump for high draw,fuel pump wiring harness,the pump itself,pickup screen in tank, and crank sensor(tried this already). If he comes in and we solve the...
13
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next