 Prev |
Professional Automotive Repair Technical Discussions for May 15, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for GM
| Help Request | Answers | |
| 1989 Chevrolet S10 2.8L Manual Low VIN: 1GCCT14R6J This is a 700r4 and trans was rebuilt and sk-700 jr kit installed. It worked fine for about a week, now its seems to be stuck in 3rd gear and will bind up and not move when shifted to manual low, reverse is fine. Any ideas would be appreciated before I pull it... |
View | |
| 1999 Chevrolet Astro 4.3L Excessive Emissions, MIL Lamp on VIN: 1GNDM19W7X This vehicle have a issue for emissions it will not set the cat monitor to run for some reason it will not run is there something that im missing with this p0146 code ?. Trouble codes: P0146 |
View | |
| 2007 Chevrolet Tahoe LT 5.3L No Start, MIL Lamp on VIN: 1GNFK13067 tahoe starts and runs fine cold, after driving 10 to 30 miles trac control and stabiatrac warnings come on then check engine light. No drivabily problems just warnings for trac control continue to come on every 5 min, check engine light stays on with codes po1... Trouble codes: P0171, P0174, C0561 |
View | |
| 1996 Oldsmobile Aurora 4.0L No Start, Stall VIN: 1G3GR62C6T the vehicle starts and stalls.has the required fuel pressure.has plenty of spark.compression passed.120 psi in all cyjinders |
View |
Fixes & Summaries for GM
| Fix/Summary | Answers | |
| 2002 Buick Century Custom 3.1L odometer VIN: 2G4WS52J22 At this time I have not been able to fix the dash lights of this car as the owner said that with the mileage of the car almost 300,000 miles would not be worth the money to fix it. I want to thank all those that described the problem as the resistors breaking ... |
9 | |
| 2003 Chevrolet Malibu 3.1L No Start VIN: 1G1ND52J33 HELLO TO ALL AND THANKS FOR YOUR INPUT. THIS ONE IS FIXED, AFTER REPLACING THE IGNITION LOCK AND KEY CYLINDER I STILL HAD PROBLEMS. SO WITH MORE ADVISE I REPLACED THE ELECT PART OF THE IGNITION SWITCH AS WELL. (SHOULD HAVE JUST DONE IT, WAS TRYING TO HELP CUS... |
20 |
