|Prev||Professional Automotive Repair Technical Discussions for May 7, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1998 Ford F-150 XL 4.2L Poor Idle Quality, Hesitation, Stall VIN: 1FTZF1826W
MAF voltage I know should not exceed 4.6 volts, im getting back probed reading of about 4.8v. So, that does not concern me. Made sure tubing and all related hoses are properly secured. Changed air filter. Cleaned MAF with "Mass Air Flow Sensor Cleaner". Still ... Trouble codes: P0103 (Maf voltage high output circuit)
Fixes & Summaries for Ford
|2001 Ford F-350 Super Duty XLT 7.3L Excessive Emissions, Poor Idle Quality, Hesitation, MIL Lamp on VIN: 1FTSW31F11
Thanks for all your help everyone. I tested the glow plug and injector wiring. I found 2 bad glow plugs on the left hand side of the motor, so I decided to pull off that VC. upon removal, I noticed the connector was not completely attached. 2 wire harness and ... Trouble codes: P1316 (IDM codes stored).
|2003 Ford F-350 Super Duty Lariat 6.0L injectors?
Hi to all, excellent job, #8 injector was loose, pumping diesel like mad, waiting for wnty injector assembly, and will replace all bolts and re-torque as req'd. Very good information from all parties. will post when finished thanks again Xerxes