|Prev||Professional Automotive Repair Technical Discussions for March 20, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2005 Chrysler PT Cruiser GT 2.4L Poor Idle Quality, MIL Lamp on VIN: 3C8FY78G55
After replacing a broken timming belt with no history on the car. Check eng light came on with a lean code , tested fuel pressure ,smoked intake,and found no leaks or fuel pressure problems at this time . Also it is at max lean at idle and at high speed . Now ... Trouble codes: P0171 (Fuel system lean)
|2003 Dodge Ram 1500 Truck 4.7L Misfire, MIL Lamp on VIN: 2G1RTHU563
Truck came in SES on and misfire at idle in drive the miss lesson's in neutral but still there. Misfire gone off idle and driving. I scoped cyl 3 good pattern I swapped coils with another cyl changed plug any way swapped injector from another cyl good injector... Trouble codes: P0303
|2005 Jeep Liberty Sport 3.7L gear selector VIN: 1J4GL48K25
after transmission rebuilt no starting in park, only neutral. adjusted cable at gear selector lever in car. Then it worked for a while. until customer came back with the complaint that it didn't seem right. felt to tight to me. removed valve body again to rech...
Fixes & Summaries for Chrysler
|2000 Dodge Durango 5.2L converter VIN: 0001211110
I kept going back to the bench to look at this trans. I hade to find the problem before I went thru all this work putting it back in. I took a day off to get a break and when I came back I found it! There was a small sliver of metal in the switch valve. It was...