Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for March 12, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1994 Ford Ranger XL 4.0L Poor Idle Quality, Hesitation, Misfire VIN: 1FTCR11X7R
We replaced both head gaskets and refinished the heads. Problem of white smoke solved but still ran bad.installed 02 sensor no differance, ing module no differance. Fuel trim on left side is way high,it will stablize but bring off a idle and it shoots way up .... Trouble codes: 512 (Kam test failure)
View
1996 Ford Taurus SHO 3.4L Controls VIN: 1FALP54NOT
Good afternoon i have a 96 taurus sho here that all heater and fan controls do not work, even the rear defrost does not work. The radio is a part of the control head and it works fine, i have power and ground where i think it should be, i can not find a good d...
View
2001 Ford Windstar SE 3.8L Engine VIN: 2FMZA51421
2 months after first repair customer returns with no start. Diagnosis: hydrolock #2 cylinder, oil was milkey, but the oil had no taste of coolant. No coolant in cylinder. Coolant was not low. My question is has anyone had this problem? the only way water could...
View
2004 Ford F-250 Super Duty XL 6.0L No Start VIN: 1FTNX20P24
HI ALL I HAVE THIS 6.0 WITH A "no start" CONDITION, the icp desired is 950psi, my actual while cranking is 950-1500. This thing does not even attempt to start. Ther are no codes. I have two new batteries so crank rpm is good. Any and all help will be greatly a...
View
2004 Ford Ranger XLT 4.0L Slinger and crush sleeve. VIN: 1FTZR15E94
Crush sleeve?!?!! This one came in with some pinion bearing noise in drive... I should have bowed out then, but of course I didn't... The pinion was shot from the front bearing locking up, did ring and pinion(all Yukon stuff...). I was doing final assembly tod...
View

Fixes & Summaries for Ford
Fix/Summary Answers
1999 Ford F-150 5.4L Low Pedal VIN: 1FTRX18L6N
i hate to say this but this one is fixed.sometimes it is the most obvious thing to fix, but hardest to see. the truck had sit for about 10 months after the customer tried fixing his brakes himself, he replaced the master cyl and both rear calipers,but could ne...
27
2004 Ford F-350 Super Duty XL 6.0L Mechanical VIN: 1FDSW34P34
Hi Guys,Im happy to say were not shop #4 that could not fix this problem child.We removed all 8 injectors (none were clicking on the click test)and had them tested.They found 4 bad (2 on the right bank and 2 on the left bank.)We replaced the 4 bad and it start...
21
2008 Ford E-350 Super Duty 6.0L No Start, Cuts out, Stall VIN: 1FTSS34P48
I will be changing the IPR as soon as I can get one from Ford being way out here everything is air freight! It really makes sense that the screen gets clogged in the regulator causing this to happen. I don't own a fuel pressure tester and had to rely on this g... Trouble codes: P2623 (Injector control pressure circuit open last week code).
6
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next