Trouble Ticket Help Requests for DTC P0341
|1996 Pontiac Grand Am SE 2.4L No Start, Backfires VIN: 1G2NE52T2T
P0341: CMP Sensor Performance. Hello, getting pretty aggravated with this Quad 4. Vehicle does not start, backfires through intake and exhaust when cranking, I obviously have fuel and spark. Saw the crank sensor code and changed it. Customer had already changed the batt and starter. I repla...
|February 02, 2011|
|2004 Hyundai Elantra GLS 2.0L MIL Lamp on VIN: KMHDN46D44
P0341: Camshaft Position Sensor Circuit Malfunction. ... (A-cam position acuator cicuit bank 1) which I replaced the cam acuator after much difficulty, it was seized in the cylinder head. Now I keep getting a p0341 cam postion code. Replaced cam position sensor twice with OE sensors.I have performed all wiring t...
|February 04, 2011|
|1997 Oldsmobile Silhouette 3.4L MIL Lamp on VIN: 1GHDU06E8V
P0341: Cmp sensor out of range. ... this oldsmotrouble that customer had swapped an engine from 3.4 to a 3.1 out of a 96 grand prix. trying to get inspected and keeps setting p0341 code,checked signal out of sensor all way to ecm plug and has signal while running,good, clean and square,koeo ...
|February 18, 2011|
|2001 Volkswagen Passat GLS 1.8L No Start VIN: WVWAC63B81
P0341: Camshaft position sensor circuit a range/performance bank 1 or single sensor. Vehicle has extended crank @ times. When vehicle won't start no spark is there @ coil. Replaced 4 coils with coils from dealer(bulletin WG/WG00(USA), Date of issue:Apr2004). Problem still there. No other complaints, just extended crank (over 20 seconds). Sems ...
|February 18, 2011|
|2000 Cadillac Eldorado ESC 4.6L MIL Lamp on VIN: 1G6ET1298Y
P0341: CMP Sensor Performance. ... spent pretty good money for a Jasper engine and trans replacement that I performed. The car ran great for 10k miles or so until the check engine came on. The car still ran great but it's inspection time and the car will not pass with the light on. The two ...
|February 21, 2011|
|2005 Ford F-350 Super Duty XL 6.0L No Start VIN: 1FTWW31P65
P0341: Camshaft Position Sensor Circuit Range/Performance. ... vehcile came to us with a multitude of customer complaints and problems. Upon initial diagnosis, we found that on a cold start, vehicle would have and extended crank time(almost 60 sec) and misfire upon start. Lots of blue smoke was noticed as well. When c...
|February 23, 2011|