|Prev||Professional Automotive Repair Technical Discussions for December 4, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Dodge Ram 2500 Truck 5.9L Surge VIN: 3D7KU28C23
Hey guys and gals, My customer came in with a surge complaint.With the cruise set between 55 and 65 mph.On test drive,it was felt.Could not see any change in tach,or speedo.But could see the tps voltage move up and down,at 1.01 volts to 1.12..Is there a known...
|2004 Jeep Liberty Limited 3.7L Mechanical VIN: 1J4GL48K74
Thank you - For your time and any help you can offer. My shop had burned to the ground last November a year ago. And we lost much of everything. We needed a 4 wh drive vehicle to get in and out ... and have been working to get this one going. Snow is dropping...
Fixes & Summaries for Chrysler
|2002 Chrysler Intrepid 2.7L Poor Idle Quality, Misfire, MIL Lamp on VIN: 2B3HD46R42
Found 2 problems #1 fuel inj only ohmed out to 6.85 and negative battery cable end was eaten apart from corrosion high resistance Trouble codes: 201 (inj circuit), 202 (inj circuit), 562 (batt voltage), 700 (trans).
|2004 Dodge Durango SLT 5.7L connecting rod VIN: 1D4HB48D84
i want to thank every one for there replies after 2 days and a dozen phone calls with the warranty company they agreed to have the eng replaced they sounded like they did not want to because the rod bearings were ok, they only cover internaly lubericated part...