|Prev||Professional Automotive Repair Technical Discussions for November 27, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2007 Honda Odyssey LX 3.5L Hvac VIN: 5FNRL38777
Thanks in advance for any help on this van. Customer came in with complaint of lack of heat compared to what it used to be. This van has front and rear heat, auto dual zone in the front. I took temp readings both at idle and 2500rpm at the following locations,...
|2001 Nissan Frontier SC 3.3L bearing noise charge VIN: IN6MD26T61
my question is has anyone replaced the bearings in the supercharger looks like theres a kit available trying to help a service writer I'm a Chrysler tech. If you did do the bearing job were any special tools needed thanks in advance
|2007 Nissan Versa SL 1.8L electric windows VIN: 3N1BC13E87
Vehicle came in with none of the windows working. Seems I am not getting power to the window motors. Customer states that the window quit working 1 by 1 over a period of time. They did not all go out at the same time. I shot power to each window to make sure t...
Fixes & Summaries for Asian
|2004 Hyundai Santa Fe 2.4L No Start, Stall VIN: KM8SBI2B94
hello there everyone-this one was a headscratcher! the end result was 4 bad cam sensors-and yeah 2 were dealer parts.the signals were all there,the system ohmed all ok at every check and still timing was very advanced -badly enough to buck and break the starte...
|2004 Mitsubishi Lancer ES 2.0L Broke Timing Belt VIN: JAJAJ26EOY
What I didn't write in was it spun 5 teeth off belt,not broken,got lucky,put belt on,first crank ran bad and thought it had bent valves,pulled plugs back out ran a compression test all had 100 or better,so I put plugs back in ,cranked and it ran like a kitten,...