|Prev||Professional Automotive Repair Technical Discussions for October 4, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2006 Dodge Sprinter 2500 2.7L Unknown VIN: WD0PD64466
We have a 2006 Dodge 2500 Sprinter with a vibration/shutter at low RPM. When the vehicle was first brought in we found loose ball joints, very cupped and worn tires and the drive shaft center bearing had a hop in it. We've replace the tires, ball joints and ha...
|2006 Dodge Caravan SXT 3.3L MIL Lamp on VIN: 2D8GP44L86
This code is related to the coolant temp sensor reading not being close to the amb and air temp readings after key has been off for a certain amount of time. I CAN duplicate this by letting van sit at least 1/2 hour, turn key on, coolant temp will read 130 deg... Trouble codes: P0116
Fixes & Summaries for Chrysler
|2000 Chrysler 300M 3.5L MIL Lamp on VIN: 2C3HE66G9Y
WE BELIEVE THE CAR IS FIXED AFTER 2 ACTUAL DRIVE CYCLES ALL MONITORS CAME UP AND CHECK ENGINE LIGHT STAYED OUT. RETURNED CAR TO CUSTOMER HAVE NOT HEARD BACK FROM THEM. (KNOCK ON WOOD) I WOULD SAY ITS FIXED. Trouble codes: P0442 (Small evap. Leak), P0456 (Very small evap. Leak).
|2001 Chrysler Town & Country (Van) EX 3.8L Rotors VIN: 2C8GP64L81
I replaced M/Cyl. and brake booster, flush system & bled. Drove 100 miles so far so good, I think it 's going to be ok. Thanks every one.
|2005 Chrysler Sebring 2.4L hydraulic system VIN: 1C3EL45R35
Thanks for all of the help. Problem turned out to be antirattle clip installed wroung on the left front wheel pushing the caliper piston back over time. Thanks again.
|1970 Dodge Challenger T/A 5.6L gauges VIN: JH23J0B300
Thanks guys was able to find the right diagram, had to take two harnesses to make one