|Prev||Professional Automotive Repair Technical Discussions for September 4, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2001 Dodge Durango 4.7L Engine VIN: 1B4HS28N41
We switched over the intake, oil pan from original engine, vehicle started & ran went to put in gear it quit and would not restart. It does crank but no power from fuel pump relay to module. Also no buss light is lit on the dash. Any suggestions or help would ...
|2004 Dodge Grand Caravan SE 3.3L No Start, Stall VIN: 1D4GP24R35
A used engine was installed at another shop in this van and drove fine for 2 weeks. It stalled on the customer and restarted and drove to my shop. I tried to pull it in and it was not starting. The scanner revealed various codes for ckp,cmp,tps, etc. I checked...
Fixes & Summaries for Chrysler
|1995 Chrysler Sebring LXi 2.5L Excessive Emissions, Hesitation, Cuts out VIN: 4C3AU52N95
some idiot had installed a new crank sensor in the bell housing and had the air gap set incorrectly. The sticky paper on the end of the sensor was still on, I set the air gap and all is well. Thanks for everyones help.