|Prev||Professional Automotive Repair Technical Discussions for June 26, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1998 Ford Mustang 3.8L cooling fan VIN: 1FAFP4041W
fan speed does not change when commanded from low to high with scan tool. am not sure this system has two speed functionality for the cooling fan since there are only two wires going to the fan connector. hope somebody can help verify if this system is or is n...
|1963 Lincoln Continental 7.0L etc. VIN: Y86N405134
Hi American classic experts, we opened this vehicle's soft top the top get folded into the luggage compartment and now we are not able to close it,there are motor and selenoide noise when we push the operation sw but no movement. There no any experts araund fo...
Fixes & Summaries for Ford
|1993 Ford Bronco XL 5.8L reverse VIN: 1FMEU15N4P
thanks for the help. i did end up being those three bolts loose. i thought i had torqued them, but i think what happened, was that i decided to torque all of the valve body bolts first, and then torque them last. i think that because they were at a lower level...
|2002 Ford Windstar LX 3.8L Stall VIN: 2FMZA51422
Well we finally figured this one out ! We found some one had not put the car jack back in its holder and when you would go up hill or accllerate moderate to heavy the jack would pull on inertia switch wires enough to disconnect for a second by the time we stop...
|2004 Ford F-350 Super Duty King Ranch 6.8L hard tart VIN: 1FDWF36SX4
Thanks so much for the help. As soon as i got in this morning i pulled the fuel rail up and turn key on to put pressure in the line and inspected for leaks. There were no injectors leaking which was a relief, so i replaced the fuel pressure regulator as rich...