Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 21, 2010
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1992 Chrysler New Yorker Fifth Avenue 3.3L No Start, Stall VIN: 1C3XC66R3N
the engine starts and stalls.it looses injector pulse same as anti theft active. I do not have a scanner that tells me if theft is active. I just have Tech2 and IDS ,I do not do very much chry work so i just have Autoxray scanner. I have no codes and there is ...
View
1999 Chrysler Concorde LXi 3.2L Floor Leak VIN: 2C3HD46J0X
Unclogged evap drain 2 days ago. Now drains great. But somehow we still have water trickle out the rear vents onto rear floorboard. I mean a lot, will make a puddle in 30 min. Is there a second drain? do i need to start tearing apart the console and/or dashboa...
View
2001 Dodge Durango 4.7L Lighting VIN: 1B4HS28N51
Customer came in with interior lights, headlights, parking lights, and dash lights not working. Unplugged central timer module and re-connected and everything started working again so I sent customer on his way. Comes back today (3 weeks later) with same probl...
View
2005 Dodge Magnum R/T 5.7L Mechanical VIN: 2D8GV58215
Have a 2005 magnum with a loud tapping noise on acceleration or raised rpm, will go away at hight rpm. Not normal 5.7 hemi lifter noise sounds more like a single loud tap, doesnt sound like a lower engine knock. has good oil pressure and have installed new upd...
View
1995 Eagle Talon ESi 2.0L No Start VIN: 4E3AK44YXS
First time customer to us. Car was going dead at lights but would restart, then died, it would crank and not start. She had a friend work on it. He put in a PCM, she drove it 5 days and it quit again, he put in another PCM and it lasted 1 day. Then the car cam...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1991 Dodge Stealth R/T 3.0L No Start VIN: JB3XD64B5M
did have a modias scan tool check computer and it did show loosing voltage from 6-12 volts so I sent the ecm in to have rebuilt
11
1997 Dodge Ram 2500 Truck 8.0L Misfire VIN: 3B7KF23W3V
IT WAS THE #10 INJECTOR, WAS ABLE TO USE A SCAN TOOL AND FUEL PRESSURE GAGE . WITH KEY ON COMMAND THE FUEL PUMP ON TOOK FUEL P.S.I READING NOTE WHEN TRIGGERING INJECTOR ON DOES NOT HAVE A TIME AMOUNT FOR BEING ON YOU CONTROL THAT PART BUT WHEN COMPARING IT TO ...
3
2001 Dodge Ram 1500 Van 5.2L No Start VIN: 2B6HB11Y91
Customer decided to have it towed to Dodge dealer. I tried a PCM but that didn't fix it, unless the one I got was also bad. Once customer lets me know what the fix was I'll post it. Thank all for the good ideas in helping me with yet another nightmare Chrys...
16
2002 Dodge Ram 2500 Van 5.2L Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, Misfire, Poor Fuel Economy VIN: 2B7JB21Y02
i pulled the throttle body off and looked inside didnt see any gaskets sucked in and there was no oil in there. so i changed the coil even though it tested good after changing it the truck ran good oh well thanks for the help Trouble codes: P0300.
20
2006 Jeep Commander (Truck) 3.7L Hvac Box VIN: 1J8HH48K46
Thanks to all who took the time to read and or reply. It was a 2 part solution. The gear on the recirculation door was broken. You have to buy the housing to get the gear. Actuator was ok. After busting my knuckles and cutting my fingers on the weld of the pas...
5
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next