Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 1, 2010
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1992 Ford Explorer XLT 4.0L Excessive Emissions VIN: 1FMDU32XXN
this vehicle originally came in for failing emmissions due excessive NOX (over 4000 ppm high and low speed) found engine coolant empty and radiator leaking. engine passed a block test so i replaced the radiator, t-stat and flushed coolant. i also did a complet...
2002 Ford Explorer XLS 4.0L Starting VIN: 1FMZU73E12
Hi guys i need some help . I have this ford explorer pro date 04/01 guy lost all the keys . So i get keys from the dealer .i try to program the key with the ngs like i do all the time .so i went pcm to gain 10 min accecc .the ngs stop and say contact local dea...
2002 Ford Escape XLT 3.0L Excessive Emissions, Poor Fuel Economy, runs too rich VIN: 1FCU04192K
this car has run so rich it melted down all the cat converters and o2 sensors...customer punched out the cats to unplug exhaust system to even start it.The cats are now empty.He installed new o2 sensors...the mil only comes on now after 100-200 doub...
2005 Ford E-350 Super Duty 6.0L Ipr VIN: 1FDWE35P75
For all you Ford Diesel guys, thanks in advance. Vehicle came in as a no start. We have a lack of injection control pressure (max 180 psi). I am trying to run a leak test by removing the test plug at the high pressure pump and have attached a fitting to direct...
2005 Ford F-350 Super Duty XL 6.0L No Start VIN: 1FTWW31P15
hi guys need some assistant.don't work on 6.0l much familiar with them. towed in customer said shut off while on highway doing 75mph and crank and no start. code p2291,&p2290 code set. ICP read 85% and desire reads 1258 psi and ICP reading max 45psi. ch... Trouble codes: P2291 (pressure too low), P2290 (injector control pressure too low)
2006 Ford E-350 Super Duty 5.4L Left converter burns VIN: 1FDSF34556
Truck returned after 2 weeks with bank 2 converter melted again. Still no trouble codes.
2007 Ford F-150 XL 4.6L Misfire, MIL Lamp on VIN: 1FTRF12W27
Thanks for the help in advance, This vehicle came from another shop with po 340 cam sensor prob. they put a new cam sensor in it ,checking my scanner as soon as you crank the truck my solus shows cam sensor failure. I pulled the timing cover and sure enough th... Trouble codes: P0340
1999 Mercury Mystique GS 2.0L Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 1MEFM6536X
Car came in with both timming belt idler pullys busted. Installed new timimg belt kit as per info sheet provided by gates, car will not idle sets mil code p1383,have rechecked timing marks, belt tension,oil level with no change. Car will run at very high rpm s... Trouble codes: P1383 (Vct over retarded)

Fixes & Summaries for Ford
Fix/Summary Answers
1969 Ford F-100 Pickup 5.9L Poor Idle Quality, VIN: F10YRF3400
Dear Member, My customer authorized us to replace timing chain and fix carburetor leaks. So this repair authorization will not fix the misfire that we are talking about. I had 30 replies and I am really appreciate with their help. It reminded me many common ol...
1997 Ford Taurus GL 3.0L Mechanical VIN: 1FALP52U7T
First I want to thank all of you for your replies - I got a lot of good information for future referance. I removed the filter that was in line and flushed the tranny fluid then added trans-x. I drove the vehicle almost 100 miles while monitering the trans flu...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next