Join Now
International Automotive Technicians Network

P2290 Diagnostic Trouble Code Discussion for May 2010

Injector Control Pressure Too Low


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P2290
Help Request Posted
2005 Ford E-450 Super Duty 6.0L No Start VIN: 1FDXE45P95
P2290: Low icp pressure. Good afternoon fellow techs. We have a ambulance towed in that has been quite a problem child. As you can see we have replaced quite a few things in the past year. The truck is in here again for no start hot. I have not ripped it apart yet, but I am hoping it ...
May 04, 2010
2005 Ford E-450 Super Duty 6.0L No Start VIN: 1FDXE45P95
P2290: Low icp pressure. Good afternoon fellow techs. We have a ambulance towed in that has been quite a problem child. As you can see we have replaced quite a few things in the past year. The truck is in here again for no start hot. I have not ripped it apart yet, but I am hoping it ...
May 05, 2010
2005 Ford F-250 Super Duty FX4 6.0L No Start, Extended crank VIN: 1FTSW21P45
All you Ford 6.0 guys I need your help. The story is below but here is my question: When doing the air pressure test through the ICP sensor port I have air escaping from the port in the back of the high pressure pump. I have 12V to the IPR. This is the same po...
May 08, 2010
2005 Ford E-450 Super Duty 6.0L No Start VIN: 1FDXE45P95
P2290: Low icp pressure. Good afternoon fellow techs. We have a ambulance towed in that has been quite a problem child. As you can see we have replaced quite a few things in the past year. The truck is in here again for no start hot. I have not ripped it apart yet, but I am hoping it ...
May 04, 2010
2005 Ford E-450 Super Duty 6.0L No Start VIN: 1FDXE45P95
P2290: Low icp pressure. Good afternoon fellow techs. We have a ambulance towed in that has been quite a problem child. As you can see we have replaced quite a few things in the past year. The truck is in here again for no start hot. I have not ripped it apart yet, but I am hoping it ...
May 05, 2010
2005 Ford F-250 Super Duty FX4 6.0L No Start, Extended crank VIN: 1FTSW21P45
All you Ford 6.0 guys I need your help. The story is below but here is my question: When doing the air pressure test through the ICP sensor port I have air escaping from the port in the back of the high pressure pump. I have 12V to the IPR. This is the same po...
May 08, 2010