|Prev||Professional Automotive Repair Technical Discussions for May 30, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
Fixes & Summaries for Chrysler
|2004 Dodge Dakota SLT 3.7L MIL Lamp on VIN: 1D7GL42K54
Hi, just want to thank everybody for their input most was right on. The problem was the connector in front of door wire was corroded in connector. fixed wire and ran evap test and it passed. for the code p0158 I got oxygen sensor from dealer worked good. Trouble codes: P0440, P0158.
|2005 Dodge Neon SE 2.0L Poor Idle Quality, MIL Lamp on VIN: 1B3ES56C65
Hi All thank you for the seven replies. what I came up with is compression was 145 to 155 all four cylinders, replaced plug and wires, to no avail. Asked customer if they ran fuel tank below quarter of a tank they said yes so I replaced injector. Now only se... Trouble codes: P0303.
|2006 Dodge Ram 2500 Truck TRX4 5.9L Battery VIN: 1D7KS28C16
This vehicle left the shop a while back and has been back twice for other issues; both times I rechecked charging system and it's been good. No complaints from the customer. I should have noted that the batteries were almost new when the truck first came in (...
|2003 Jeep Wrangler SE 2.4L Unknown VIN: 1J4FA29183
thank you all for your help, cleaned the connections and all is fine. I appreciate all your imput. The connections were corroded adn once cleaned all the guages worked great