|Prev||Professional Automotive Repair Technical Discussions for April 11, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1993 Chrysler Concorde 3.3L long crank time VIN: 2C3EL56T1P
My own 93 Chrysler Concorde 3.3 developed an intermitent long crank/hard start condition.I had suspected a fuel pressure leakdown and tested as per the TSB, it was not the problem. I left the fuel gage connected and found that at times,you would not get the 2 ...
|1996 Jeep Grand Cherokee Laredo 4.0L Stall VIN: 1J4FX58SOT
need help.this jeep came to us from another shop. has been to 3 other shops.the list of parts that has been replace is everything.we have ck or replaced parts.crank senser ecm.we replace dist shaft worn.car will run stall loose spark and noid lite.after coolin...
Fixes & Summaries for Chrysler
|2001 Chrysler LHS 3.5L valves,blowby, fuel VIN: 2C3HC56G51
thanks for all your help . I found several things the injector #1 was dirty , cleaned that helped . still had a miss fire not as bad as before .what it came down to was had to pull the head had that checked the intake lifters were not bleading down enough and...
|2006 Chrysler Pacifica Touring 3.5L MIL Lamp on VIN: 2A4GM684X6
Thanks for the info, sent this one for a reflash as per service bulletin, no faults were present at the time of testing, and so far so good with the reflash, customer has not reported light coming back on and is happy !! Trouble codes: P2066 (fuel level sensor 2 performance).
|2008 Chrysler PT Cruiser 2.4L odometer VIN: 3A8FY48B78
Thanks for all your help, the problem ended up being an internal cluster problem, Got an exchange cluster from the dealer and odo is working again.