Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for March 30, 2010
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1995 Chrysler Concorde 3.3L No Start VIN: 2C3HD56T4S
Dear Fellow Techs; This one is driving me crazy! Car came in with a no-start condition. Checked usual no-start test; results listed. While checking for codes with a Modis, cranked engine, it started right up. Fuel pressure, spark, injector pulse all good. Disc...
View
2001 Chrysler Town & Country (Van) LX 3.3L No Start VIN: 2C4GP443X1
I have a vehicle that the customer said it was running normaly. they shut it off and went to [...] minutes latter, no crank, light click. Owner had AAA jumpstart it & he barly got it running but died when he let it idle. They towed it in. I disconnected b...
View
2005 Chrysler Town & Country (Van) 3.3L Mechanical VIN: 2C4GP44R05
this rear brakes squeal horribly have they have been driven a few thousnad miles,already returned rotors and tried another set of pads,but noise returns.any know concerns why this would continue to have concern
View
2001 Dodge Ram 1500 Truck 5.9L Poor Idle Quality, Hesitation, Misfire VIN: 3B7HF13Z71
Thanks in advance for your help. This truck has an intermittent loss of power/hesitation, almost stalls. The customer stated that when the problem occurs, he shuts off the engine with the vehicle in neutral and then restarts it and the problem goes away. I hav...
View
2003 Dodge Ram 1500 Truck 4.7L TCC Lockup
Thanks in advance for the help. Have 03 Dodge 1500 wuth 45RFE that Jerks almost like you hit the brakes for a split second, when TCC locks in, Truck came to me with CEL on and P0841 and P1775. Fallow t/s steps and leads to solenoid assy defective, replaced wit...
View
2006 Dodge Sprinter 3500 2.7L master cylinder VIN: WD0PD44436
hi. dodge techs.this truck came in from a body shop with the brake pedal not holding. we figured had to be the master cylinder ,so we installed a new one the brake pads are good all around ,we bled the whole system does not seen to be air at the beginning we c...
View
2000 Jeep Grand Cherokee Laredo 4.7L MIL Lamp on, all gauges dead int VIN: 1J4GW48N2Y
hello all, this jeep is fustrating. the gauges go inop intermintly. it only lastsapprox 10 sec then it works fine. the vehicle towed in initially for no start and found the connecter at right kick panel filled with conductive grease and messing with the antith... Trouble codes: P1687, B0CM, B0CM
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1998 Dodge Ram 2500 Truck 5.9L drive belt VIN: 3B7KF22Z0W
Well, thanks to all you shared their input. The theory that it was a resonance frequency of the belt rather than belt slippage made perfect sense so I tried a gatorback belt as a few people had recommended and sure enough that took care of the problem.
17
2003 Dodge Ram 2500 Truck 5.9L prndl VIN: 3D7KU28C73
Well the nightmare is over. This Dodge was a weird one that I couldn't find any real diagnostic flow chart on. Many people suggested an Ignition Switch as it is a common failure, so I tried that and it didn't work. I was working backwords, trying to go afte...
7
2006 Jeep Liberty Renegade 3.7L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1J4GL38K16
Intake vales leaking slightlty.TSB 09-007-06.runs great now.Seems to be a big problem on these.So at least we have some more work.LOL Trouble codes: P0301 (cylinder 1 missfire).
None
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next