Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for March 15, 2010
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2004 Chrysler Intrepid 3.5L No Start VIN: 2B3HD56G84
this vehicle was towed into the shop the other dat lady was driving it and it just shut off, we brought it in the shop checked fuel pressure and it is fine( checked for spark and injector pulse and we have none, cam and crank sensors read out of sinc and the t...
2005 Chrysler Pacifica Touring 3.5L Surge VIN: 2C4GM68425
Hello all, It has been a long time since I have needed to rely on the great IATN group. I have this 3.5 liter chrysler pacifica that is driving me crazy. This vehicle surges under light throttle between 1500-2000 rpm most of the time. Seems to do this more whe...
1999 Dodge Ram 1500 Truck 5.9L Hesitation VIN: 34ERTTYYUI
Vehicle bogs down, wont go past 35 mph. Misfire trouble codes were present of course. Fuel pressure at 45 consistantly even when bogging down. Map readings good and tried new map sensor, 18 inches at idle down to zero on full throttle. Map volts around 1.8 ... Trouble codes: P0300
2000 Dodge Ram 1500 Truck 5.9L Poor Idle Quality, Misfire VIN: 1B7HF16Z4Y
Hello a nice one here truck came in with missfire on cly 5,7,8 worse when cold warmed up would get a little better did plugs wires cap and rotor on change come to find out had bad valve seats and cracks between cyl 5,7,1 so put new cly heads on but reused old ...
2001 Dodge Durango 4.7L abs VIN: 1B4HR28N31
customer states that on high speed firm braking 50mph and up there is a sinking of brake pedal followed by palsation. I replaced porprotioning valve thinking rear was not being applied first causing front to lock up . this was worng. This only has rear abs and...
2002 Dodge Intrepid SE 2.7L Poor Idle Quality, Hesitation, MIL Lamp on VIN: 2B3HD46R32
Hey fellow techs, got a 2.7 here with misfires on bank 2. It misses for about 30 seconds then runs good for about 5 seconds. You can watch the misfire data & see 2,4,6 rack up counts & then it stops. While the misfires are happening the inj on time for bank 1 ... Trouble codes: P0300 (Random multilpe misfires)
2005 Dodge Dakota SLT 4.7L Cluster VIN: 1D7HE42N15
The problem on this truck started by the seat belt light staying on sometimes. Now when driving down the road the seat belt light will flasher & the chime will sound even if the seat belts are fastened. The only code in the system is a B2213 Cabin Compartment ...
2001 Jeep Grand Cherokee Laredo 4.0L Reverse gear VIN: 1J4GW48S51
Transmission feels like it is trying to go into reverse but vehicle barely moves...we are not a trans specialty shop. (Warranty Company job - They want to know what problem is)Transmission is apart on the bench now except the over drive unit.
2004 Jeep Grand Cherokee Special Edition 4.7L Cooling Systems VIN: 1J4GW48N34
Customer came in with excessive noise coming from engine compartment and it heated up a couple of times. Noise is coming from the hydraulic cooling fan assembly. It appears to us that it might be turning in the wrong direction, however, there isn't enough info...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1993 Dodge D350 5.9L speedometer VIN: 3B7ME33CXP
Thanks too all that responded.Gutted harness just to make sure all wires in good shape.Installed a new rpm sensor and all systems up and running. Once again thanks to all. P.S. First sensor from dealer was bad out of the box,don't you just love this busines...
2006 Dodge Charger R/T 5.7L Hesitation, Stall VIN: 2B3KA53H06
Hello:The stalling is fixed,had a bad cam sensor,the hesitation was coming from # 3 coil Trouble codes: N0NE.
2003 Jeep Liberty Sport 3.7L No Start, security shuts down VIN: 1J4GK48K73
Well this vehicle is fixed. not much interest in this one only 4 responses. 2 members fred and john did understand that this was a non skim vehicle and did not actually have a way to reset the alarm system. There simply wasn't an alarm. For some reason no one ... Trouble codes: P1686.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next