|Prev||Professional Automotive Repair Technical Discussions for February 7, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1991 Acura Integra GS 1.8L Excessive Emissions, VIN: JH4DB1560M
Hello Acura Technicians, I have a problem with the timing adjustment. This car failed the smog emission timing test. The timing was 37 degrees BTC. The specification should be 16 degrees BTC.The car runs fine, has not lost power and idle is very smooth. I foll...
|2003 Mazda 6 S 3.0L Cuts out, MIL Lamp on VIN: 1YUFP80D23
the system is weird i have checked all i can see and when i clear the codes and drive the car it will loose power and then i can restart and it will drive fine and at times gives me either one code or many any ideas on what i should look for mazda dealer not h... Trouble codes: P2110, P2135
Fixes & Summaries for Asian
|1997 Honda Accord EX 2.2L heater core VIN: 1HGCD7206V
ok thanks to all replies.what i found was the heater hose nipple coming out of the back of the head was plugged up solid.still don't know why the heater hose was around 195 degrees.thanks for all your help.kyle
|2002 Honda CR-V EX 2.4L Differential VIN: JHLRD78912
This CRV is not actually fixed yet, but I have a used differential going in sometime this week. I will only install the front section of it since the gearset is brand new. I only needed another few days before I could confirm this fix, but this post needs to...
|2004 Honda Pilot EX 3.5L interior lights inop VIN: 2HKYF1894H
hey guys thanks alot for all the help and insight. you were right on about the fuse #11 in passenger side fuse panel it was blown. replaced fuse and checked circuit all o.k. again thanks. fab.
|2003 Kia Sorento LX 3.5L No Start, MIL Lamp on VIN: KNDJC73343
thanks to all that replied.replaced both camshaft sensors and timing belt all is well thanks again jim Trouble codes: P0340.