|Prev||Professional Automotive Repair Technical Discussions for October 17, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1991 Plymouth Colt 100 DL 1.5L valve train VIN: JP3CU14A4M
i just bought this car for a commuter and it runs good and smooth but at idle the valves tick a little more then i like i removed the valve cover and adjusted them to spec, the intakes are at 6 thousands and the exhaust are at 10 thousands but still a little n...
Fixes & Summaries for Chrysler
|1988 Dodge Ramcharger 5.2L Stall VIN: 3B4GW12YXJ
We put about 11 hours into this car checking compression,timing,distributor,fuel pressure, ran with exhaust system disconnected,resealed vacuum leaks at throttle body,replaced cracked TPS switch installed new CTS and computer. Vehicle still ran poorly after it...
|1994 Dodge Dakota 3.9L fuel gauge VIN: 1B7FL26X0R
im sorry for the long wait, we fixed this and i posted repair-thought i closed request, must have got lost! we removed fuel tank, looked through the filler hole before pump removal, what we found was the fuel sending unit float (maybe a different shape than o....
|2002 Dodge Intrepid SE 2.7L Unknown VIN: ZB3HD46RO2
Thanks for the advice. As the problem occured i tried to test pressure at L-R pressure tap on side of tranny but did not have and couldnt find the correct thread size to go into this tap. So i sent this one to the chrysler tranny tech and the tranny did have ...
|2005 Dodge Grand Caravan 3.3L turn signals lights VIN: 1D4GP24RX5
Thanx for all that responded to this I wasn't sure about it just being the turn signal arm. especially when it made one of the healights go off when you signaled Chrysler body control modules are confusing some tymes Thanx Tom