|Prev||Professional Automotive Repair Technical Discussions for October 4, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2005 Ford F-150 XL 5.4L Hesitation, Cuts out VIN: 1FTPX14535
Hesitation on accel w/ cut out. No codes and have done latest software reflash. Almost feels like fuel cutout. Looked at misfire data on generic mode. All cylinders pass individaully when problem occurs. Have not checked fuel pressure. Looks like you need a sp...
Fixes & Summaries for Ford
|2002 Ford Windstar 3.8L No Start, Hesitation, Cuts out, Stall VIN: 2FMZA52432
Thank you to all who replied,Derek [...] Washington nailed it.The concerns were all related to a defective alt/reg asm.After much testing and going in circle's,I had decided to start from page one.I replaced the alt with a new unit and all has been ok for over ...
|2007 Ford ranger 4x4 3.0L Cuts out, Stall VIN: MNCBS32978
appreciated;and many thank's for every one been tryed to give me help, realy i was happy ,also some ideas were good .. any way i send the pick up to DUBAI , FORD REALER.. from one week ago ,but still same, not found the problem, and supervisor said want's to c...
|1999 Mercury Villager (Van) 3.3L MIL Lamp on VIN: 4M2XV11T32
Well my tech caused this one. when he changed the timing belt he pinched the wiring to the distributor and cut one of the wires in the harness that runs out of the dist to the little condenser on the side of the dist. had to disassemble top of dist to get to t... Trouble codes: P1320 (Dist signal interrupt).