 Prev |
Professional Automotive Repair Technical Discussions for October 3, 2009 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 1996 Chrysler Sebring JX 2.4L No Start, Stall VIN: 3C3EL45X0T stalling but find no codes customer said had camsensor code but has not returned for us. also the dash does not work at all except for warrning lights and speedometer. any ideas for this one would be apreicated. Trouble codes: P0340 (cam shaft position sensor malfunction) |
View | |
| 2004 Chrysler 300M 3.5L lr latched VIN: 2C3HE66GX4 shifts great, intermitent limp in with [...], no tr codes,wiring tested with good values, some debris in first valve body swap, cam/crank sensor done 6 months ago followed by the 6/09 flash update, thinking of clearing volatile memory and reflash &/or new m... |
View | |
| 2006 Chrysler 300 2.7L 4rth VIN: 2C3KA53GX6 Vehicle came in from transmission shop; scanned for codes, found DTC P0657; check ign power supply to module-ok, checked fuse at trunk fuse box, removed fuse and reinstalled - ok Actuator-solenoid supply voltage ckt "A" monitor yellow wire at TCM pin#38 - (T7... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1998 Dodge B1500 3.9L Poor Idle Quality, Misfire, MIL Lamp on VIN: 2B6HB11X9W First, thanks for all your help, and sorry for the delay in closing this request. We ran the van to warm it up which also seemed to maximize the # of misfires on 3 and 6. Still only misses at idle or under no load. Re-checked compression on all cyls. Found #3 ... Trouble codes: P0303, P0306. |
7 | |
| 2000 Dodge Intrepid ES 2.7L fans inop VIN: 2B3HD46R1Y WELL FELLOWS YESTERDAY WHEN I HAD CHECKED THIS VEHICLE I HAD POWER AT ALL RELAYS, THE 2 FAN RELAYS AND THE A/C RELAY WHEN I GOT IN THIS MORNING I CHECKED FOR POWER TO THE RELAYS AGAIN I STILL HAD POWER WHEN I REMOVED RELAY AND ISTALLED A JUMPPER WIRE I THE LOS... |
10 |
