|Prev||Professional Automotive Repair Technical Discussions for September 19, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2006 BMW 325xi 3.0L 4x4 VIN: WBAVD13516
the car drives ok on a straight line whenever you try turning a full turn to the left or right thats when you feel the locking feeling in the steering.There are codes 5EBa Steering angle sensor implausible and 5F3A Transfer case internal
|2002 Land Rover Discovery Series II SD 4.0L ignition lock VIN: SALTL15402
customer called me stranded, key will not turn in ignition, was able to rock vehicle back and forth and suddenly key would turn. has anyone seen problems with gear position switches or interlock switches causing this problem??
|2001 Volkswagen Jetta GLS 2.8L engine VIN: 3VWTG69M51
This car came in with alot of upper engine noise and the oil pressure light is off. Well its full of oil and the oil is about 600 miles into the change. My first thoughts without going through oil pressure test was to pull the pan to see if the screen is pluge...
|2002 Volkswagen Cabrio GL 2.0L dlc VIN: 3VWDC21V32
This vw came in with engine light on. customers complaint was that after starting car would rev up once in awhile. It has an aftermarket radio that has been disconnected. And there is still no communication. DLC has power and grounds. Any information or any id...
Fixes & Summaries for European
|2002 Jaguar S-Type 3.0L MIL Lamp on VIN: SAJDA01N42
I thought his was taken care of several weeks ago with the fix. Sorry about that. The fix after all the great replies was the fact the fuel was on the bad side. One of the replies was to have cust drive more often and use a better brand of fuel. Thanks Iatn m... Trouble codes: P0171, P0174.
|1967 Mercedes-Benz 250S 2.5L Poor Idle Quality, Stall
Much helpful information...thanks all. The carburetors gave me some fits as I was unfamiliar with them but the help was excellent. Alain had some good tips and I quote: i never remove the carbs of car , except if there is a base gasket problem .there was a co...