Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 18, 2009
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1976 International Scout II 5.6L No Start VIN: 123IHC4567
Have a no spark condition on this old Scout. I'm unfamilliar with this ignition system and can find no service info helpful in diagnosing this ign. system. Appears to have a hall effect sensor in distributor with 3 ohms across both wires. Tested for voltag...
2002 Chrysler Town & Country (Van) Limited 3.8L B-Pillar Switch VIN: 2C8GP64L82
Greetings to all, any help will be appreciated. I'm not real familiar with this system (it's my first one). The power sliding doors (both left and right) won't open or close with the B-pillar button. The overhead console buttons work and the RKE fob works norm...
2004 Chrysler Crossfire 3.2L MIL Lamp on VIN: 1C3AN69LX4
Car came in with a P0410 code. The air pump works, passages are clear, computer will command the pump on. But this keeps coming back, sometimes in 10 miles sometimes in 200 miles. Any ideas would be greatly appreciated Trouble codes: P0410 (Secondary air injection)
1998 Dodge Stratus 2.4L No Start VIN: 1B3EJ46X8W
customer said that car had quit going down road.we have no 8 volt supply out of cav. #44 on pcm.but if you take the test light and put it on positive battery and probe #44 8volt supply to cam and crank sensor you have voltage and it will stay there until you t...
2002 Jeep Grand Cherokee Limited 4.7L steering VIN: 1J4GW58N72
hello iatn members, i need your help have a 02 jeep that costomer complained car shakes when brakeing over 60. apon drivng i felt this very bad shake, starts in the front the steering wheel will shake alot keep your foot on the brake the shake will travel thro...
2005 Jeep Grand Cherokee Limited 5.7L T-Case VIN: 1J8HR58245
Hi all, looking for the best fix on another one... This came in yesterday with the Service 4WD lit up and a nice growling noise when moving, worse when turning. The first problem is it has one tire with .359" tread and 3 at .245" - .277", they are all the same...
1998 Plymouth Grand Voyager SE 3.3L blows fuse VIN: 2P4GP44R5W
car came in on the hook engine fuse blows when you try to start it.we unplug all sensors including bcm ecm still when you turn key on it blows 20amp engine fuse when you put a test light into the out side of fuse clamp to live wire it shows a flash to ground i...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1999 Chrysler Sebring JXi 2.5L Hesitation VIN: 3C3EL45H3X
the fans had nothing to do with this fix i guess thats about the tempature the problem ocurred at it turnde out to be a shielding problem the crank sensor harness was run right next to the distributor and was inducing voltage why this does not happen at lower ...
2000 Dodge Intrepid R/T 3.5L MIL Lamp on VIN: 2B3HD76V6Y
I watched the fuel trims while spraying carb cleaner around intake. The fuel trims on both banks went further negative. I informed customer about the intake leak and gave her a estimate for resetting the cam timing and resealing the intake/injector o-rings but... Trouble codes: P0175 (bank 2 rich).
2000 Dodge Dakota 3.9L Hesitation, Misfire, MIL Lamp on VIN: 1B7GG22X3Y
putting a new os sensor fix the check engine light. truck has run crappy for me going to let customer have it back thanks again jason Trouble codes: P0132.
2002 Dodge Ram 1500 Truck 4.7L 3-4 upshift VIN: 3D7HA18N82
Thanks for all the help. We replace the trans. control module and everything works great now.
2005 Dodge Sprinter 3500 2.7L No Start VIN: WD2PD54425
Rather than get buried in this truck my boss decided to ship it to the dealer. THEY SAID... it was fuel contamination and dropped the tank,clean it, replaced a line somewhere and relaced ALL 5 injectors. Well the first thing I did when it came in was to take a... Trouble codes: P2045 (Ckp position sensor), P2817 (Engine Off time not observred cranking too long I guess).
1996 Jeep Grand Cherokee Laredo 4.0L No Start, Stall VIN: 1J4GZ58S5T
Thanx for all the help and suggestions. After letting the Jeep run a very long time I finally got it to fail only by manipulating the PCM connectors with the PCM warm. I replaced all three connectors with used set since I could not find new ones and have yet...
1996 Jeep Grand Cherokee Laredo 4.0L Hesitation VIN: 1J4GZ58S2T
Thanks for the help. I replaced the transmission tranducer sensor as mentioned by some of you and all is well after clearing codes. Mike P
2002 Jeep Grand Cherokee Laredo 4.7L No Start, Cuts out VIN: 1J4GW58N42
Well it did need a PCM installed a new OEM and programmed VIN and milage and it fired right up. Trouble codes: P0601 (Internal check sum Error).
1997 Plymouth Voyager SE 3.3L Instrument cluster/ starting system VIN: 2P4GP44RXV
replaced the instrument cluster, cust hasnt reported a problem since
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next