|Prev||Professional Automotive Repair Technical Discussions for July 18, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler Concorde LX 2.7L Cuts out, Stall VIN: 2C3HD46R0X
ok another tech replaced the head gaskets. and now several days later the vehicle is shutting off while turning. checked p/s switch ok, idle air control valve ok, what i did notice but dont understand is the cam/crank synch PID shows OK and lost on and off, an... Trouble codes: P1391
|2002 Jeep Grand Cherokee Limited 4.7L Control Head (Dual Zone ATC) VIN: 1J4GX58J92
Does anyone know how to recalibrate the a/c control head without a DRB III? Alldata says DRB III is needed, is this true? I thought I had done it without tool before but can't remember how. A tech. previous to me replaced a actuator and did not recalibrate. Al...
Fixes & Summaries for Chrysler
|1996 Chrysler Sebring JXi 2.5L Misfire, MIL Lamp on VIN: 3C3EL55H0T
RITE ON THE $ GUY. I REPLACED A DISTRIBUTOR(REMANUFACTURED) AND PUT A ANOTHER CRANKSHAFT SENSOR AND DROVE IT AROUND NAVER MISFIRED. LADY PICKED UP HER CAR ALL HAPPY NAVER CAME BACK. THANKS FOR THE HELP ALL U GUYS. Trouble codes: P0301 (cly 1 misfire), P0302 (cly 2 misfire), P0303 (cly 3 misfire), P0304 (cly 4 misfire), P0305 (cly 5 misfire), P0306 (cly 6 misfire).
|2002 Chrysler Sebring LXi 2.7L No Start, NO CRANK VIN: 1C3EL55R82
After many hours of banging our heads on this car, it is finally repaired. The Engine computer was bad. The no bus on this car meant the computer was offline, there was no comunication between the scan tool and the computer. We tried unplugging every si... Trouble codes: P1684 (serial link internal failure).