|Prev||Professional Automotive Repair Technical Discussions for June 27, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2001 BMW 325Ci 2.5L Cooling System VIN: WBABN33401
There were no problems when it came in other than the Code P0128 and MIL On. we replaced the Thermostat assy, filled it, bleed it and drove it. It overheated on me and when I got back to the shop I found a cracked coolant tank. I replaced it, filled it bleed...
|1989 Mercedes-Benz 300E 3.0L Blower Fan VIN: WDBEA3OD2K
Vehicle has low speed fan only, does not matter if A/C or heater is on. I have very little information. I am wanting the location of the blower motor resistor. Thanks to everyone for the help.
|1998 Volkswagen Jetta GL 2.0L Clutch VIN: 3VWRA81H6W
ok vw techs i need more help. i have a 98 jetta in the shop. when you push the clutch pedal the pedal sticks to the floor and the clutch does not disengage. i can push the arm on the tranny down and the pedal does pop back up. there are two things i'm wonderin...
Fixes & Summaries for European
|1997 BMW Z3 Roadster 2.8L hanger bearing VIN: 4USCJ3327V
thanks guys ! the ujoint was it. a little hard to find being it was tight. thanks to all. don.
|2002 BMW 325i 2.5L MIL Lamp on VIN: WBAET37422
Hey Guys,,sorry for the late repost,cust had vehicle for awhile,,any way back to my problem,after checking things further I decided to check readiness monitors and found that Evap and secondary air would not run?? am able to run activation tests,but no matter ... Trouble codes: P1619.
|1990 Jaguar XJ6 4.0L Poor Idle Quality, Hesitation, Stall, Misfire, would not rev up VIN: SAJDKALD3A
Thanks for all your help replies which are whole heartedly appreciated. You would not believe what we had found. Some smart Alex had removed the four bolts attaching the crankshaft timing wheel to the vibration damper inner hub and then spot welded the senso...
|1987 Mercedes-Benz 300D 3.0L Hesitation VIN: VDBE83308M
This car was on the backburner,so sorry for the late post.This car will not be fixed as the price of the repairs are worth more than the car. That said,previously unkonwn to me the customer had tried to take apart the injection pump and repair it himself...