|Prev||Professional Automotive Repair Technical Discussions for April 10, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1999 Acura RL Premium 3.5L Excessive Emissions, MIL Lamp on VIN: JH4KA9655X
hi has any one had this happen vehicle had code for insufficient egr flow p0401 cleaned egr ports and now have cat efficiency code popping up has any one had this issue or have any insight on this issue thanks ahead of time for your responses
|2001 Infiniti QX4 3.5L No Start VIN: JNRDR09YX1
Hello fellow techs, I have this Infiniti that will crank but will not start, no spark and good fuel pressure. There is no code's. Found blown fuse 63 , that fuse give's power to ECM and coils, I have to ask the custmer to go ahead for more time. But does these...
|1999 Mazda 626 LX 2.5L No Start VIN: 1YVGF2205X
Good morning all. I have this 99 626 no start. Vehicle will run for 20-30 secs then lose fuel pressure and die. If I bypass fuel relay car runs great.Easy fix right, nope new relay same results.Have checked all voltages at both main and fuel injection relays a... Trouble codes: P1409
|1996 Toyota Tacoma DLX 2.7L oil pressure low VIN: 4TAWM72N5T
Hey guys, got one here that has little or no oil pressure.The motor isn't rattling or making any noise. Customer stated he was driving down the highway when the oil light came on. He shut it down and had it towed in. Hoping someone has come across this before....
Fixes & Summaries for Asian
|2001 Honda Accord EX 2.3L MIL Lamp on VIN: JHMCG665XX
This car is now fixed. Based on the advice of the members who replied. Most of the responses focused on the Honda TSB (00-018)for the new fuel pressure regulator and re-routing the new vacuum tubing. had a tough time locating the bulletin. Honda parts got ... Trouble codes: P0171 (Lean).
|2004 Hyundai XG350 3.5L Timing Belt VIN: KMHFU45E74
I did get another tensioner from Hyundai, but we also made sure the eccentric pulley was adjusted correctly. After we re-installed the belt and adjusted the pulley we turned the motor back 90 degrees let it set then turned the motor over two turns. Cars gone...
|1987 Isuzu Pickup 1.9L No Start, Poor Idle Quality
WELL SOMETIMES YOU CANT SEE THE FOREST FOR THE TREES. IT HAD NEW PLUGS IN IT, SO I ASSUMED THEY WERE OK. NEW ONES FIXED RIGHT UP. I THINK IT WAS A COMBO OF ALT NOT CHARGING AND CHOKE NOT COMING OFF AND NO THRMOSTAT. RAN VERY COLD. HE HAD DONE ALL THE SHADE TRE...
|1992 Mazda Miata 1.6L coolant VIN: JM1NA3517N
sorry took so long to post a fix, but wanted to make sure customer has not come back. The temp sending unit we replaced at first was on the front side of the motor, which was the wrong unit. The temp sending unit is on the backside of the motor, screwed up on ...
|1995 Mitsubishi Galant S 2.4L starter VIN: JA3AJ46G1S
I want to thank you guys for your help. We wound up telling the coustomer to come and get there car that it was not fixed. We did replace the starter with and OEM. The history was shakey with this car, and other people had been working on it also. Thanks again...
|2000 Nissan Frontier SE 3.3L Poor Idle Quality, Hesitation, Surge VIN: 1N6ED27Y7Y
Thank you to all that replied. The customer asked if we'd mind if he took it to the dealer. I told him that would be fine. He called me a couple of days later to tell me that the dealer checked it out real good and they as well could not find anything wrong. I...
|2006 Subaru Impreza WRX 2.5L Hesitation, Misfire, MIL Lamp on VIN: JF1GG79646
I hope I did not make anyone think I was taking the easy way out trying to get help before I did my job and try more tests on my own first. I could see with the low miles this car had and the fact that the first big service had not come up I might have trouble... Trouble codes: P0303, P0302.
|2007 Toyota Camry XLE 2.4L Hesitation, MIL Lamp on VIN: JTNBE46K37
Sorry about getting back so late. A mouse had chewed the wires inside the intake at the knock sensor. Repaired wires and all is good. Thanks again Dana Trouble codes: P0327, P0328.