|Prev||Professional Automotive Repair Technical Discussions for March 15, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2000 Jeep Cherokee Classic 4.0L Misfire VIN: 1J4FF58S5Y
Vehicle came in with overheating issue and a #5 misfire. found a 4 inch crack in cylinder head. after installing a reman head the misfire is still present. found no signal to #5 injector, tested at ecu with still no signal so we replaced with used unit. we the... Trouble codes: P0305 (cly 5 misfire)
|1989 Plymouth Acclaim 2.2L Poor Idle Quality, Misfire VIN: 1P3BA46K3K
Hi all Sort of a strange one here that I feel like I am missing something simple. Car has had a reman PCM, idle air motor installed at another shop in its history. Also the customer had the cat converter changed also. Original complaint was a rough idle jus...
Fixes & Summaries for Chrysler
|1999 Chrysler Cirrus LXi 2.5L strut VIN: 1C3EJ56H3X
Thanks for everyone's response. The answers were running 50% upper strut bearing, and 50% lower ball joint. I was able to determine that it is the lower ball joint by injecting grease into the ball joint seal (the lower ball joint on this model does not have...