|Prev||Professional Automotive Repair Technical Discussions for October 26, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1995 Acura NSX 3.0L MIL Lamp on VIN: JH4NA1186S
Came from another shop, They replace Timing belt and claim that they left one of the wiring harness for the o2 sensor touching the exhaust and burned the wire, Since then They can get rid of the code P0155, I have cht the fuse, wires and I have come to a concl... Trouble codes: P0155 (Front Primary HO2s Bank 2 Sensor 1 Circuit Mulfunction)
|2001 Acura MDX 3.5L shifting time delayed VIN: 2HNYD18221
after four months from tps adjustment & fixing related problem this vehicle returned w/ similar problem. but now tps is within specs (0.5 VOLTS AT CLOSED THROTTLE) , graphic reading of tps potentiometer shows no glits and good range from 0.51 to 4.34 volts. te...
|2003 Isuzu Rodeo S V6 3.2L 4 wheel dr VIN: 4S2DM58W33
Guy's this vehicle came in with the code CO282 and the 4 wheel dr light is on. I found little information on this code and need help and direction on diagnosing this problem. Where do I begin.Thanks,Adam
|2003 Mitsubishi Galant DE 2.4L battery drain VIN: JGFTGF4803
car towed in dead battery customer left for vacation for 2 weeks when came back battery was dead i recharged it and checked for drain it has a drain of 90 milliamps pulled fuse # 22 and drain goes away fuse 22 powwers dome lights etacs ecu disconected etacs ec...
Fixes & Summaries for Asian
|1998 Mazda 626 DX 2.0L Hesitation VIN: 1YVGF22CPW
Many thanks to those replied. Sometimes we forget the basics. Careful reviewing of the ignition system with a scope indicated a cracked spark plug in #3 cylinder. Again thank you...
|1994 Toyota Previa LE 2.4L T-case ?? VIN: JT3AC22S3R
I have decided, due to the responses and further testing that it is indeed the coupler in the t-case. Running it on the hoist with no shafts it will vibrate like mad. The vibration is definitely coming from the t-case and not the aux. shaft. We also unbolted t...