|Prev||Professional Automotive Repair Technical Discussions for August 24, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2001 Isuzu Rodeo LS 3.2L No Start VIN: 4S2DM58W11
Have a Isuzu Rodeo with a 3.2, Cranks fine, But no start, Have power to injectors and coils, But no signal pulse to ground to turn them on during cranking Went through diagnostic trouble tree, Have signal from Crank sensor going to computer, and no RPM shows o...
|2000 Kia Sephia LS 1.8L engine VIN: KNAFB1219Y
Thanks for your replies in advance. I have a 2000 Kia Sephia with 65K that emits a cloud of blue smoke only after operating at highway speeds for a period of time (10 minutes or more). Typically there is a large cloud of smoke that's emitted for 3 to 4 second...
|1999 Lexus LX470 4.7L ride quallity VIN: JT6HT00W9X
hello everyone i have a lexus lx470 that rides like the shocks are locked up and the suspension fluid was empty the are no external leaks anywhere i think the accumulators are ruptured and i think this is where the fluid is going if anyone has any deffinate an...
Fixes & Summaries for Asian
|1993 Honda Accord LX 2.2L Poor Idle Quality, Surge VIN: 1HGCB7652P
Thanks everyone, I had already checked for low coolant, and it was fine. The car hadn't acted up on me until this morning, the idle got very erratic, up and down like a toilet seat. I noted that the coolant hoses to and from the throttle body heated up fairly ...
|2004 Mazda 6 i 2.3L compressor VIN: 1YVFP80C14
thank you for the replies could not ever find a way to get codes all scan tools in shop did not offer codes on this car maybe the factory tool but i did find the problem with a little time and a little testing and logic what i ended up doing was checking all t...
|1996 Toyota 4Runner SR5 3.4L Lock up convertor VIN: JT3HN86R3T
The problem was the lock up solenoid. The problem was that Mitchell On Demand gave the spec of 11 - 15 ohms in step 1 but contradicted itself in step 3. I just wanted to make sure that step 1 was right. Thanks for the help.