Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 8, 2008
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2001 Dodge Stratus SE 2.7L water pump VIN: 1B3EJ46U91
Well what i really need is how do i remove the timing chain tension-er on this 2.7 motor. I got the access cover off and all data doesn't really say how it,s comes out. I was thinking that it should just slide out after i removed the cover but its not.Is it ju...
2003 Dodge Ram 2500 Van 5.2L No Start VIN: 2D7JB21Y43
vehicle entered shop with a no start condition. vehicle has no spark, has injection pulse on all cylinders. has proper fuel pressure. tech replaced cam sensor, crank sensor, ignition coil and pcm. vehicle still does not have spark. I checked cam and crank ...
2003 Dodge Stratus SE 2.4L head VIN: 1B3EL36X23
The car came in with a broken exhaust cam. The car had recently had a head gasket replaced by another shop after overheating. Apperently they shaved the head instead of straightening which left the top of the head warped which caused the cam to break. We repla...
2004 Dodge Durango Limited 5.7L engine VIN: 1D4HD58D54
Engine runs hot while driving or after extended idle even after replacing w/p, t-stat, and fan clutch. Customer just purchased vehicle and says it has been doing this for the past two week that he's had it. He says sometimes the temperature is pegged then afte...
2008 Dodge Avenger SXT 2.7L Starter VIN: 1B3LC56R28
This vehicle was in an accident ( hit a deer), Come in on the hook. Would not crank. Jumped power to the S terminal of the starter and it cranks, but no start. it seems that the pcm is not powering up and not sending crank signal to the starter. I don...
2004 Jeep Wrangler Unlimited 4.0L Front End VIN: 1J4FA49524
Customer Just Bought Jeep and Took It On The Interstate For The First Time And Said It Shook Over 50mph. Upon Inspection We Found The Drivers Side Lower Control Arm Bent. Replaced It As Well As New Adjuster Bolt,Still Shakes. Also Reset Alighnment, New Steerin...
1996 Plymouth Grand Voyager SE 3.3L keyless entry VIN: 2P4GP44R9T
This van was not originally equipped with keyless entry. The harness for the module is there. The customer would like to add the module and fobs but Alldata will not tell me if the body control module will recognize the new keyless entry module or if it can be...
1998 Plymouth Grand Voyager Expresso 3.3L No Start, Cuts out VIN: 1P4GP44G8W
Car stalls and will not start. Code indicates a problem with crank signal but Alldata does not list a code PO320 and no diagnostic information. Replacing crank sensor seemed to solve problem, but it returns after running car for half hour or more or even with ... Trouble codes: P0320 (IGN REF/ Crank Signal)

Fixes & Summaries for Chrysler
Fix/Summary Answers
1995 Dodge Dakota 2.5L No Start VIN: 1B7FL26G3S
Thanks for all the replies it seems that I should have looked at the powers and grounds for the computer more closely. I found that the ground for the computer was loose in its connector which would still allow it to work but if any amperage was put to it wou...
1998 Dodge Grand Caravan 3.0L dash lights VIN: 2B4GP2430W
Thanks for the quick replies. All said that I needed to push then proper buttons to initiate a recalibration test. Robert from Texas and Lamont from Georgia described the test in detail and I was able to fix the problem.
2000 Dodge Ram 1500 Van 5.9L Poor Idle Quality, Hesitation, Surge, High Idle VIN: 1B7HF16Z7Y
Tried the IAC valve first. While it did help, it did not totally fix the problem. We can break this one down to 2 problems, the idle and the surge at 65 mph. The idle problem was fixed by replacing the intake manifold gaskets. The surge was fixed by the de...
2000 Dodge Durango 4.7L Excessive Emissions, MIL Lamp on VIN: 1B4HS28N6Y
thanks to all that help . the fix was the purge solenoid was flip upside down so the vacuum lines was backwards . once again thanks to those who help :) Trouble codes: P0455.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next