Join Now
International Automotive Technicians Network

P0344 Diagnostic Trouble Code Discussion for June 2008

Camshaft Position Sensor Signal Intermittent


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0344
Help Request Posted
1997 Ford F-250 XL 7.3L Surge, Cuts out, MIL Lamp on VIN: 1FTHW26F7V
P0344: Camshaft Position Sensor Circuit Malfunction (Intermittent). ... diesel tech, after hard driving under load about 10 min. engine will lose power, to me it seems like running out of fuel but icp pressure is good, if anything icp goes up when problem presents itself. truck will run worse until you pull over and stop then ...
June 18, 2008
2002 Ford F-350 Super Duty XL 7.3L No Start VIN: 1FTSW3IFX2
P0344: Camshaft Position Sensor Circuit Malfunction (Intermittent). Had this diesel towed in after stalling on hiway with a no start,owner worked on it himself for 2 weeks then brought it in,i checked codes and camsensor kept coming up,replaced sensor, code was gone, still no start.checked glow plug systemand all is operating ...
June 26, 2008
1997 Ford F-250 XL 7.3L Surge, Cuts out, MIL Lamp on VIN: 1FTHW26F7V
P0344: Camshaft Position Sensor Circuit Malfunction (Intermittent). ... diesel tech, after hard driving under load about 10 min. engine will lose power, to me it seems like running out of fuel but icp pressure is good, if anything icp goes up when problem presents itself. truck will run worse until you pull over and stop then ...
June 18, 2008
2002 Ford F-350 Super Duty XL 7.3L No Start VIN: 1FTSW3IFX2
P0344: Camshaft Position Sensor Circuit Malfunction (Intermittent). Had this diesel towed in after stalling on hiway with a no start,owner worked on it himself for 2 weeks then brought it in,i checked codes and camsensor kept coming up,replaced sensor, code was gone, still no start.checked glow plug systemand all is operating ...
June 26, 2008