|Prev||Professional Automotive Repair Technical Discussions for April 14, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1988 Dodge Ramcharger AD150 5.9L drive shaft VIN: 1347889090
Hey all and God bless all at IATN. I have a customer that bought this ram charger when it had only 56,000 miles on it. I have changed many things on this vehicle and all have went well except this ujoint replacement in the rear shaft. He came in one day about ...
|2000 Dodge Durango 4.7L all gauges VIN: 1B247L65WS
hi everybody this truck been a thorn in my side.im hoping someone ran into this problem.i dont have any guages working and the odometer comes up no bus.the vehicle cranks fine but just wont start.i checked the back of the of instrument cluster for bad wires an...
|2005 Dodge Durango ST 4.7L Excessive Emissions, MIL Lamp on VIN: 1D4HB4848N
To all valued techs thanks for your time vehicle has code P2098 fuel trim lean downstream bank2. We have checked all wireing harnesses and ground straps replace oem o2 (downstream bank2 )and no luck .We sent to dealer because might need ecm reprog,they said ex... Trouble codes: P2098 (fuel trim lean downstream bank2)
Fixes & Summaries for Chrysler
|2002 Chrysler Town & Country (Van) LXi 3.3L power steering pump VIN: 2C4GP443S2
THANKS ALL, I FIGURED POWER STEERING TANK MYSELF BUT IT'S ALWAYS NICE TO GET THAT SECOND OPINION. REPLACEMENT OF THE POWER STEERING TANK HAS FIXED THIS VEHICLE, DUE TO PLUGGED SCREEN INSIDE OLD TANK. THANK YOU.
|2005 Chrysler Pacifica Touring 3.5L MIL Lamp on VIN: 2C4GM68455
the problem with this one was the wiring just before the nvld (leak detection switch/sensor) it had rubbed through and was corroded. i first had replaced the nvld sensor which was the most common reply. then i noticed the wiring and replaced section of wirin...
|1998 Dodge Ram 2500 Truck 5.9L No Start VIN: 3B7KF2265W
We replaced lift pump and have fixed all start problems except, first start in the morning. Suspect fuel leaking back but we have not found any external leaks and cold start problem is not consistant.
|2003 Dodge Intrepid SE 2.7L brakes? VIN: 2B3HD46R32
tanks for all replies..master was seized in brake booster bore,whei i finally got master out,was alot of corrsion.i guess corrosion was holding pressure on master and appling brakes.dont understand why ity only happened when not,but replaced master/booster/flu...
|1993 Jeep Grand Cherokee Laredo 4.0L ride control VIN: 1J4GZ58S3P
Thanks for all the help on this vehicle I replaced the the steering stablizer shock and this fixed the prolbem I did not feel or see anything wrong with shock arter removel of old one, but it must of been bad. Thanks. Tyson
|1994 Jeep Grand Cherokee Limited 4.0L Convertor VIN: 1J4GZ7856R
I finally found the exact cause of this problem. It was something I missed on the overhaul. On my second pass through the valve body, I found a tiny sliver of metal restricting movement of the Lock Up Switch Valve (next to the pressue regulator). I guess the c...
|1998 Jeep Cherokee Classic 4.0L Poor Idle Quality, MIL Lamp on VIN: 1J4FJ68SXW
Put a fork in the Jeep it is done. Thanks to Jonathan for remiending me to recheck grounds for voltage leak .I found a problem at splice connection S 114 at injector rail I also found wires touching at transmission wiring harness above transfer case The h... Trouble codes: P0138 (1/2 o2 voltage high).
|2002 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FA49S72
I got another pcm that was ment for and non antitheft vehicle, put it in and it started right up. As many of the replies stated once the pcm see the antitheft module it expects to see it everytime after otherwise it will not let it start up. Trouble codes: P1686.