|Prev||Professional Automotive Repair Technical Discussions for January 19, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1992 Dodge Stealth R/T 3.0L No Start, Cuts out, Stall VIN: JB3XD64B0N
Vehicle first came in for fuel smell and no start. Found a broken sending unit. Replaced that, the fuel pump and the fuel filter. Started car and ran for about 10 mins. before it stalled. Would not restart. Found out the customer was having the same problem. C...
|2005 Dodge Grand Caravan SE 3.3L cooling fans VIN: 2D4GP24R35
vehicle came in overheating.replaced thermostat and radiator.Still overheating.removed water pump and found plastic impeller blades destroyed.Only recovered small amount of the plastic impellers.rest must still be in system.Electric cooling fans always turned ...
|2002 Jeep Wrangler Sport 4.0L No Start, MIL Lamp on VIN: 1J4SA39S42
question on 2002 jeep wrangler 6 cyl emissions warr coverage ...on fuel pump and evap leak pump Trouble codes: P0446
Fixes & Summaries for Chrysler
|2000 Chrysler Concorde LXi 3.2L Differential seal VIN: 2C3HD36J7Y
Well when we took this apart we found that one of the seals caught the pinion seal when we installed the shaft and rolled the edge of it over. After seeing what happened I still think I can do this job without any special tools. We did borrow the seal installe...
|1992 Dodge Grand Caravan 3.0L No Start VIN: 1B4GH443XN
First I wanted to thank all who responded. I am almost ashamed that I missed such a seemingly simple diagnosis. the problem in a nutshell was weak spark not missing but weak. spark would easily jump a 1/2 inch gap out of the coil. that's great. spark would on...
|1996 Dodge Grand Caravan SE 3.0L illumination lights VIN: 2B4GP44R9V
well thank you all for responding. I had checked most of your sugestions already. I have put way to much time in on this one. all the imputs and outputs of bcm seemed ok tryed a different bcm. switch got tested a 3rd time so.. I called customer and offere...