|Prev||Professional Automotive Repair Technical Discussions for December 24, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2000 Dodge Dakota SLT 4.7L cam, crank sensor VIN: 1B7GG2AN3Y
I have a 2000 Dodge Dakota that came in with a code 1391 int. lose of crank cam sensor. Code only sets when cold. We have replace the crank sensor and the code reset. At this point we replaced the cam sensor and the vehciel ran worse. Any ideas?
|2005 Dodge Ram 3500 Truck ST 5.9L steering pump VIN: 3D7MX48C46
Need to get this one fixed ASAP. Truck has no assist and hydroboost acting funny. Fluid is shiny, like metal particles in fluid. While driving, the steering wheel can be moved back and forth approximatly 1/8 turn each way without making any difference in steer...
Fixes & Summaries for Chrysler
|2004 Dodge Grand Caravan SE 3.3L Lock Up Convertor VIN: 1D4GP24R44
Thanks for the help everybody. Lane mentioned the O2 sensors which I hadn't thought of, unfortuantly they were fine. Kevin, I tested as you mentioned with the pressure guage, and lo and behold the TCC was slipping. I pulled the pan and found no clutch material...
|1995 Jeep Cherokee Country 4.0L No Start VIN: 1J4FT78S6S
thanks teem, most all the reply's i got were right on the fix. what i found was the siginal from the pcm to the asd relay would fall out when you tried to crank the eng. the problem was under the relay box. i even jump the relay as some of you had suggested bu... Trouble codes: 42 (open or shorted asd relay).