|Prev||Professional Automotive Repair Technical Discussions for November 24, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1996 Dodge Intrepid ES 3.5L Misfire, MIL Lamp on VIN: 2B3HD56F6T
Evening ladies and gents.Have one with a good misfire at idle. Multiple cylinders,cancel injectors one by one and no noticeable drop in RPM. Progressively getting worse.Check basics at first. Spark-plugs, ignition wires, vacum leaks(did not remove EGR Valve)Sc... Trouble codes: 300 (Multible misfire)
|1997 Dodge Ram 2500 Truck 8.0L Cooling Systems VIN: 3B7KF23W5V
Truck runs hot when towing lighter toy trailer uphill only. Cust. states it gets to 230F. We only got it to heat up once. Replaced fan clutch and unable to duplicate but cust says problem still exists. We have basicly rebuilt the cooling system and checked the...
Fixes & Summaries for Chrysler
|1999 Dodge Grand Caravan SE 3.8L Compressor VIN: 1B4GP44L2X
First off- Thank you to the people who took the time to reply. The problem was two-fold. First a ruptured desiccant bag and secondly a bad Compressor. The fix was to Flush the rear system, Flush the front hoses and Evap Core. Replace the front expansion valv...
|2000 Jeep Grand Cherokee Laredo 4.0L Stall VIN: 1J4GW48S3Y
Thanks for all the tips. The fix was a new crank sensor. Based on the responses it seems that crank sensor are a weak point on this vehicle. I could not duplicate the concern, but based on replys installed the sensor, then we drove about 100 miles. Now the c...