|Prev||Professional Automotive Repair Technical Discussions for November 22, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler 300M 3.5L Steering
hi all. this car has about a quarter of a steering wheel turn with no response to the wheels--excessive wheel play. the front end seems fine--tie rods, ball joints, etc. it would seem that the problem must be in the rack, as there is no place else to look. is ...
|1997 Dodge Stratus ES 2.5L Poor Idle Quality, Stall, no power VIN: 1B3EJ56H4V
HELP!!!--this lump has a severe lack of power and no vacuum. High mileage yes but compression decent at 95-105psi. Timing @ idle is 5deg After?!?! - checked timing marks - all bang on; checked cat--hollow already; wave forms @ pcm for both CMP & CKP are ok. co...
|2001 Dodge Grand Caravan ES 3.3L airbag VIN: 2B4GP44G91
I have been repairing this vehicle as it was involved in an accident that set off the airbags, I was able to replace the Driver & Passenger airbags (clock spring looked ok and is working), and module, checked and light came on. so, I got out the Genisis and fo...
|2000 Jeep Grand Cherokee Laredo 4.0L p0748 VIN: 1J4GW48SXY
This bad boy came in with Check engine light. P0748 - Governor pressure Solenoid. It also is stuck in 3rd and shift into 4th (limp mode). We Flush the system blew the lines. (Radiator/cooler is new), replace the Governor pressure and transducer solenoid. Check...
Fixes & Summaries for Chrysler