|Prev||Professional Automotive Repair Technical Discussions for June 30, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1995 Chrysler Cirrus LX 2.5L No A/C Clutch Engaugement VIN: 1C3EJ56H2S
This Cirrus 2.5L has no a/c compressor clutch engaugement. I switched the relay with the fuel pump, but no luck. With my MODIS I can get the clutch to come on with key on engine off. My Modis shows the pressure transducer at 3028 Kpa. I translate this to 438 P...
|1996 Dodge B2500 5.2L no spark no start
had van in shop now for 2 weeks came in with no start, had crankshaft sensor code, changed that iac and ignitin coil now van runs but if you shut it of wont restart for about 15 minutes when dead a p0340 code shows up which states camshaft sensor ciruit what c...
Fixes & Summaries for Chrysler
|1997 Chrysler Concorde LX 3.5L MIL Lamp on VIN: 2L3HD56F9V
Thanks to all for the help- even though the egr valve and pressure transducer passed all tests replacement solved the problem. I would also like to add that the customers complaint about the missfire was also corrected with the valve. Thanks to iATN and all th... Trouble codes: P0401.
|1992 Dodge Dakota 3.9L Excessive Emissions, Poor Idle Quality, Poor Fuel Economy, MIL Lamp on VIN: 1B7HL26X5N
sorry took too long to answer, wanted to be sure the correction of cleaning ground was right. thanks for your time
|1994 Jeep Grand Cherokee Laredo 4.0L abs VIN: 1J4GZ58S8R
Most said the connector is on the left of the center console possible under the carpet. Customer has not yet returned so I will see then.