Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 19, 2007
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1995 Chrysler LHS 3.5L overheating VIN: 2C3HC56F7S
car came overheating took thermoatat out still overheats did pressure test with plugs out holds press.no water in cyls. the heat guage in the dash stays normal while its cracking banging and spewing out the cap (removed) and no thermostat, it doesn't take long...
View
2002 Chrysler Sebring LXi 2.7L 1-2 shift VIN: 1C3EL56R82
Thanks in advance for reading this, I'm not the greatest trans tech, but am trying to learn. The vehicle will have a long 1-2 shift, I tried the quick learn, my cvi numbers are LR 48, OD 119-133, UD 44-60, 2-4 45-109, I know the 2-4 are high, after quick learn...
View
2002 Chrysler Town & Country (Van) LXi 3.8L blend door rear VIN: 2C8GP54L92
have tried resest with off and recylcle buttons. when reset will just continue to move back and forth forever and never settles on a spot. setting codes for both actuators in rear (travel to far).please help
View
1996 Dodge Ram 1500 Truck 5.9L Hesitation, Surge, MIL Lamp on VIN: 1B7HF16Z7T
Customer tows a trailer over a mountain pass. SES light comes on only while towning. All my scan data looks normal right now but my freezeframe scan data is off... rpm of 640 and map of 3.5" and load of 13.3 ltft 32.8 and stft 13.3 Fuel pump replaced last mont... Trouble codes: P0171, P0172
View
2000 Dodge Ram 2500 Van 5.2L No Start, Cuts out VIN: 2B7JB21Y0Y
greetings to all,this van at times will cut out and also not start at times.i changed crank sensor but still have same problem.further testing shows when it does not start i lose power to my injectors and also to my ignition coil.looking at a wiring diagram th...
View
2002 Dodge Intrepid SE 2.7L LR pressure switch circuit VIN: 2B3HD46R12
Code: P1776 Solenoid Switch Valve Latched in L-R position. Scanner shows open and close so I know that change of state of switch circuit is working. I replaced the valvebody and solenoid pack but problem is still present. The data on scan tool shows the switch...
View
1993 Jeep Grand Cherokee Laredo 4.0L start then stall VIN: 1J4GZ58S3P
same as above
View
1992 Plymouth Colt 1.5L No Start VIN: JP3CV14A2N
This vehicle came in on a hook not running. Initially found no spark and knowing the failure rate of these distributors, installed a known good one. Still have no spark and no injector pulse. Have checked fuses and all ok. Tried inducing fuel and nothing. Cann...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2001 Dodge Stratus SE 2.4L No Start VIN: 1B3EJ46X91
RECIEVED SOME GREAT E MAILS-A FEW NOTED TO CHECK WITH DEALER ON FEDERAL WARRANTY-8-80K-THE VEHICLE QUALIFIED-AFTER WE VERIFIED IT TO BE A FAULTY PCM-HE HAD IT TOWED TO THE DEALER TO SAVE ABOUT A THOUSAND DOLLARS-THANX BRIAN Trouble codes: P0601 (pcm internal controller failure).
7
1999 Jeep Wrangler Sport 4.0L Cuts out VIN: 1J4FY19S6X
o2 sensor was at .5volts during the event as bob suggested.replaced the o2 and fixed it.nothing about the o2 looked faulty but this is not the first time i have seen a chrysler 02 do something wierd.thanks to everybody who replied.
7
1996 Plymouth Voyager 3.0L wipers,dome VIN: 2P46P2432T
IT WAS ABOUT SPLIT BETWEEN WIPER SWITCH AND BCM IN THE REPLIES. MOPARS SERVICE BULITIN SUGGESTED SWITCH FIRST SO THAT IS HOW WE WENT.WORKED OK WHEN IT LEFT HERE BUT TIME WILL TELL/IT SEEMED TO WORK GOOD FOR A WHILE WHENEVER YOU DID SOMETHING TO IT.WE ALSO CHEC...
7
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next