|Prev||Professional Automotive Repair Technical Discussions for March 25, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1988 Ford Aerostar 3.0L No Move VIN: N0TAVALBUL
Hi Real Tranny Techs ;)}} 1988 Aerostar... A4LD tranny... Please help an Amature out ;)?? I built this thing about 30K miles ago.. I did use the black plastic selective washers & the nickel plated sealing rings on the center support... Recently, it started ...
|2004 Ford F-150 FX4 5.4L Misfire, MIL Lamp on VIN: 1FTPW14524
Vehicle came in for mil, misfire occurs in cylinder 7, changed all plugs, have spent many hours, two Ford Dealers looked at it, they could not find problem, one dealer said #7 rod bent (makes no sense) we checked that, pulled valve cover, checked lifters, cam,... Trouble codes: P0307, P0316 (misfire occurs first 1000 rpm)
Fixes & Summaries for Ford
|1997 Ford F-150 Lariat 4.6L engine VIN: 1FTDX1769V
I changed out the lifters and had 13 bad ones, i have ran the vehicle for 2 weeks and there is a small rattle in the mornings, I think i am going to try some sort of engine oil system cleaner in it and see if that will help. Thanks for the input Judd
|2006 Ford E-350 Super Duty 5.4L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1FTSE34L56
I'm going to call this vehicle fixed, although I had it fixed once before. I guess time will tell. The fix was another coil. I ran the flow chart for P0356 and on the third step it had me test the coil with a spark tester. Guess what? No spark. So I pulled out... Trouble codes: P0356 (Ignition coil pri/sec circuit failure).
|2001 Lincoln LS 3.0L 3-4 shift VIN: 1LNHM86S31
Thanks to all who replied. One particular IATN member had the exact car with the exact symptom at the same time I had mine. He called me at the shop and we compared notes. He fixed his by replacing a broken 4-3 prestroke spring which requires removal of valveb...