|Prev||Professional Automotive Repair Technical Discussions for February 18, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Jeep Liberty Sport 3.7L lash adjusters VIN: 1J4GK48K63
This 3.7 is noisy. I found several spongy lash adjusters on the right bank. I replaced all six after performing an oil pressure test: 75-100 psi from idle to 2000 rpm. I changed the oil & filter. The noise came back after running 5 minutes in my bay. The lash ...
Fixes & Summaries for Chrysler
|2000 Chrysler Sebring LX 2.5L Fluid Leak
Just wanted to close this case for now. Due to scheduling problems I still haven't gotten the car back in the shop but I now know what to look for and I will be most likely replacing the solenoid pack and gasket and since enough of you said you don't need to r...
|2001 Dodge Durango 4.7L Electronic VIN: 1BH4HS28N8
sent the vehicle to the dealer and they reflashed the pcm and tcm, the light came back on the following day with the same code. i have checked all schematics and related wiring cannot find any thing wrong, now after the reflash its looking like a tcm failure. ...
|2002 Dodge Intrepid SE 3.5L No Start, Poor Idle Quality VIN: 2B3HD46V42
Thanks for the replies. The number 3 fuel injector was leaking. Fuel pressure was within specifications, however the HC's were high on start up. This lead me to look further at the injectors for leak down. Sure enough found one dripping one drop about every 10...