Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for December 30, 2006
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1991 Ford Ranger Custom 4.0L engine VIN: IFTCR11XXM
Truck over heats, but only while driving. Heats up quicker if you turn a lot of corners. Will not over heat sitting at idle no matter how long you leave it run. Has had a rad flush - heater core flush - new thermostat - new fan clutch. Very little heat inside ...
2000 Ford F-350 Super Duty Lariat 7.3L Poor Idle Quality VIN: 1FTWW33F4Y
hi techs, this one is a strange one. after it gets up to operating temp,it starts loping at idle,seems to run fine otherwise,idle speed is ok.changed fuel filter,no help.checked codes and had a p1209 and p1211.while idling i unplugged the ipc sensor and it idl... Trouble codes: P1211
2001 Ford F-350 Super Duty XL 7.3L runs fine VIN: 1FTSX31F62
Diesel Techs please help. I have a 2001 7.3 liter diesel with a very wierd sitution. I have diesel fuel mixing with coolant, as you drive fuel pushes its way out of the degas bottle. The fuel is raw fuel. The vehicles runs starts and runs fine. Any ideas are a...
2002 Ford Mustang 3.8L abs VIN: 1FAFP40432
Vehicle came from another shop with ABS Light on. Code set was C1165. Tested and came up with a bad RR Speed sensor as it was out of specs (ohmed at 1635 ohms and specs call for 1830-2760 ohms). Cleared codes and road tested and light comes back on. Noticed RR...

Fixes & Summaries for Ford
Fix/Summary Answers
2004 Ford F-350 Super Duty XL 6.0L Misfire VIN: 1FTSX31P74
thanks everyone we got are customer on the road again. he drove it a couple day an with good report. nick was right we needed 4 new injectors. you guys were right i was confusing the oil exhuast to be a oil leak. one mentioned checking fuel pressure. we checke... Trouble codes: P0263.
2004 Ford Crown Victoria LX 4.6L No Start VIN: 2FDHP74W24
Hi to all, Thanks to all who replied. Since the PCM was DOA I could not upload the info with the NGS from the old PCM to download on to the new PCM. I opted to purchase the J2534 and use the Motorcraft website to programm the new PCM. As far as the PATS it was...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next