Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 27, 2006
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Asian
Help Request Answers
2006 Honda Pilot LX 3.5L running lamps VIN: 5FNYF28176
Hi there, I'm in Ontario, Canada. client has bought car on e-bay from the U.S. in order to me Standards it reqs daytime running lamps, in Ontario the main beams are illuminated at approx 60% during daytime, there are universal modules to wire into car, but all...
2003 Hyundai Sonata GLS 2.7L booster VIN: KMHWF25H43
customer said pedel was hard first thing in morning then got better when drove a ways.I could not replicate problem.I was wondering if there were problems with boosters on these cars.I don't usually see this problem.Usually see they work or not hot or cold not...
2000 Lexus LX470 4.7L master cylinder assembley VIN: JT6HT00W9Y
After replacing rear pads and bleading system we have a break fluid leak coming from under the master cylinder area. Bled breaks per instructions from mitchell a second time. Customer returned 2 weeks later with same problem brake fluid leaking from under mast...
2001 Lexus GS300 3.0L oil leak VIN: JT8BD69S11
hello fellow techs. i have this 2001 lexus gs300 which has an oil leak coming down between the engine and tranny, just like a rear main seal leaking. i have pulled the tranny and replaced both the rear main and frt. tranny seals. with the tranny off, i inspect...
1995 Nissan Altima GLE 2.4L Mechanical VIN: 1N4BU31D2S
i need some help from a nissan parts expert on whether an engine from a 2000 altima will fit and work correctly, and what modifications if any are necessary, i have a 95 model with a melted engine and a great deal potential;ly on an engine from a 2000 model, s...
2000 Subaru Outback 2.5L Starting VIN: 4S3BH6656Y
this car came in with a no crank condition. the starter was replaced and now car starts. this problem was also there with the old {orginal} starter!!! when cranking engine over, not every time, the engine sounds as if it is compression locking. it will always ...
1998 Toyota RAV4 2.0L MIL Lamp on VIN: JT3HP10V4W
Help to toyota techs. I am trying and i repeat trying to change the vsv for the egr valve. I have been playing with this for some time now and am getting nowhere. This is 4x4 so i don't know if that makes a differnece but i cant even see the damm thing. Any he... Trouble codes: P0401
2003 Toyota RAV4 2.0L Stall VIN: JTEHH20V43
Hello Very clean lady's car. After rebuilding engine low end because oil sludge ruining crank bearings I was very happy because engine was running just like new after repair. I usually test drive at least about 30 miles after this kind of work. Problem sta...

Fixes & Summaries for Asian
Fix/Summary Answers
1994 Lexus ES300 3.0L No Start VIN: JT8GK13T0R
Thanks to all. I replace the ecm and the mas with used parts. The car is fixed,however i do not know what part fixed it Thanks again Joe
2002 Lexus GS300 3.0L Cuts out VIN: JTB53JSG0W
Hi everybody, thank you for all the helps almost everybody suggested to replace the pedal acceleration sensor which fixed the problem and all is well. Thank you again. Best regards Trouble codes: P1120 (No description), P1121 (No description).
2001 Nissan Maxima SE 3.0L MIL Lamp on VIN: D71T838056
thanks for all the responses. car was returned to nissan dealer to reflash computer,then we replaced bank 1 cat. , reset mil and the car is now ok. again thanks for all the help. Trouble codes: P0420.
1993 Toyota Camry XLE 3.0L Hesitation VIN: 4T1VK13E4P
Thank you all for helping with this problem car it was a nightmare. the customer decided to purchase an ecu and this fixed the vehicle. he has been in touch several times and said it was working great. thank again
1998 Toyota Tacoma DLX 2.4L Engine VIN: 4TANL42NXW
Thanks guys for the replies, looks like the next step is to check the oil pressure cold and hot and see if there is a problem, with the mileage it might be a timing chain problem, customer had to pick up the vehicle, again thanks for the help
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next