|Prev||Professional Automotive Repair Technical Discussions for November 25, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler Concorde LX 2.7L ignition switch VIN: 2C3HD46RXX
Weird starting on this one. When I turn the key to start position and hold it there, the starter will sometimes have no response for a few seconds, and then start cranking. The delay is usually about 5 seconds, but vary from 1 to 8 seconds. Before replacing th...
|2003 Chrysler Sebring LX 2.7L MIL Lamp on VIN: 1C3EL45T63
I have this sebring here with an intermittent check engine light on with code 1391 it only comes on during cruise on freeway or light acceleration when vehicle is at operating temp. I checked out wave patters on both ckp and cmp and found no irregularites. Ive... Trouble codes: 1391 (intermittent loss of cmp/ ckp)
Fixes & Summaries for Chrysler
|1988 Chrysler Daytona 2.2L Headlight Door VIN: 1C3BA64A7J
Thanks to Christopher [...] for taking their time to help. All of you contributed to the fix. The module receives a signal(high amp draw)from the motor as it come up against the stops which are adjustable. The module turns on the m...
|1994 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4GZ58S2R
It's finally fixed!!! Thanks for all the great replies. It ended being ECM. Checked everything once again just to make sure. Got brave and took ECM apart, found a capacitor burnt up. Sent truck to jeep and had new ECM put in and programmed. RUNS BETTER than ev...