|Prev||Professional Automotive Repair Technical Discussions for November 4, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1996 Ford Thunderbird LX 3.8L No Start VIN: 1FAIP6246T
hello group car came in on hook...cust has already bought a fuel pump..tell me how much to install it...i told him i need to check vehicle out first. fuel pressure is within specs n holding and im gettin a injector pulse. i checked for codes and had a random m... Trouble codes: P0300
|2003 Ford F-250 Super Duty Lariat 5.4L Unknown VIN: 1FTNW21L83
customer concern is a low speed growl. you wont hear the noise above 25 mph. it is noticable when taking off or slowing down. the inner spindle bearing was not dry or damaged. noise is hard to hear on hoist. almost sounds like brakes are draging a little or ru...
Fixes & Summaries for Ford
|1996 Ford F-150 Eddie Bauer 4.9L misfire VIN: 1FTEF15YXT
Thanks to all. I used my 2500 scanner before to access mode 6 on a different vehicle, and it is great to know that only some 97 and later Fords allow this! Thanks to all who took time to reply, especially the one very detailed response on accesssing mode 6 wit...
|1998 Ford Taurus SE 3.0L MIL Lamp on VIN: 1FAFP52U6W
Thanks to all guys that replied, Joe & Tom were right, I had siezed divertor valves, Installed 2 new valves & is know working properly,, Thanks for the help, Brian Trouble codes: P0411.
|2000 Ford Explorer XLS 4.0L Cuts out VIN: 1FMZU62E71
thanks to all who reply. this vehicle has been a little tricky because when you turn off the ignition sw and quickly turn on the problem gone. so I eliminate the fuel pump as the problem. but some of you asked me for the gas pressure so I hooked my gauge and n...
|2003 Ford F-250 Super Duty XLT 6.0L Mechanical VIN: 1FTNW21P43
Thanks for all of the replies that I got on this one. First of all, I just wanted to say that this truck is a logging crew truck, and has been severely abused and neglected. It had multiple problems. They said that they had been riding with oil in the coolant ...