|Prev||Professional Automotive Repair Technical Discussions for November 3, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1998 Dodge Durango 5.2L Stall VIN: 1B4HS28Y1W
hi every one hope you all could help i have this durango that will stall when put in to drive but not in reverse.but not all the time.did find intake pan leaking so i fixed that but still does it.did try new iac sol still same rr plugs still the same did rr up...
|1994 Jeep Grand Cherokee Laredo 4.0L abs sysytem VIN: 1J4FX58S2R
jeeps abs comes on at about 5 to 6 mph when stopping. checked all tone rings, air gap, and sensor ohms. also checked for axle brg play. put on scanner and found right rear sensor would not show mph until about 6 to 7 mph than follow others perfectly. mitchell ...
|2002 Jeep Grand Cherokee Limited 4.7L compressor operation VIN: 1J8GX58N02
We need any input from Jeep and AC techs. We replaced the blend doors as they were broken with the updates from Jeep, also replaced the evap core even though it was not leaking. Reinstalled everything and now the compressor will not come on (compressor did wor...
Fixes & Summaries for Chrysler
|1996 Chrysler Cirrus LX 2.5L Hesitation, Surge, Cuts out, Misfire VIN: 1C3EJ56H8T
the fix turned out to be faulty plug wires, couldn't see it on scope but replaced wires and all seems well thanks for the help Jim
|1998 Dodge Grand Caravan SE 3.3L Poor Idle Quality, Cuts out, Poor Fuel Economy VIN: 1B4GP44G4W
the plolarity of the 02 wires was reversed by another shop (was there before it came here) and apparently the pcm will not read this. my voltmeter would read it but it put a negative sign in front of the reading which i never noticed. reversed the polarity of ...
|1992 Plymouth Grand Voyager LE 3.3L abs VIN: 1P4GH54R7N
thanks to all of you who replied. the problem was related to the recall that a lot of you advised about, advised customer to go to chrysler dealer fro repairs