|Prev||Professional Automotive Repair Technical Discussions for September 2, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1990 Honda Accord EX 2.2L No Start VIN: 1HGCB7162L
This car is my future son-in-laws. He had been having trouble starting and then intermittent stalling and finally couldn't be restarted after a stall while driving. Towed to a garage and diagnosed with faulty distributor. I replaced it with a rebuilt and ran w... Trouble codes: 15 (Ignition output signal)
|1994 Mitsubishi 3000GT 3.0L Misfire VIN: JB3AM44H4R
I only have spark on cyl 2 and 4. I have taken out the distributor and can turn it by hand. When turning I can hear all six injectors clicking, but only fire spark on 2 spots. My guese is that we have that I have the wrong ECM. Now with the story. Man buys car...
|1990 Nissan 240SX XE 2.4L No Start, Hesitation, Cuts out, Misfire VIN: JN1HS34P4L
found plus fouled out,replaced them, got car running, check found coolant sensor shorted, still fouling out plugs in 10 miles.
|1999 Subaru Forester S 2.5L 1-2 shift VIN: JF1SF6553X
Car came to shop for a 120k service.We performed a TransTech flush.On the road test after the flush the trans would shift into 2nd almost immidiatly on exceleration causing a power lull.The trans fluid was overfull before the flush.The customer claims there we...
Fixes & Summaries for Asian
|1998 Nissan Maxima SE 3.0L Misfire VIN: JN1CA2106W
The car was repaired by replacing all of the injectors. Thanks to all who offered help. Troy Trouble codes: P0300.
|2002 Nissan Sentra CA 1.8L No Start, possible immobilyzer VIN: 3N1CB51DX2
I appriciate all the help that I recieved from IATN members. The information had been very valuable. It's a tough decision to make I didn't want to gamble the unit cost around $600.00 So I checked all power supplys from ecm relay, battery,fuses. I tested all g...